MOT Status
ExpiredMileage
164,909 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Front Shock absorbers has slight external damage to the casing both sides (5.3.2 (b))
General corrosion underbody
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Integral body structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))
Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Underbody covered in under seal
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Front Shock absorbers has slight external damage to the casing both sides (5.3.2 (b))
Front Windscreen washer provides insufficient washer liquid (3.5 (a))
General corrosion underbody
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Integral body structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))
Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Underbody covered in under seal
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Parking brake lever has little reserve travel
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Vehicle has corrosion underbody, sills, subframe, chassis, suspension components and exhaust
Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Rear Tyre worn close to legal limit/worn on edge both (5.2.3 (e))
Exhaust system corroded at joints
Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Power steering pipe/hose has slight seepage (2.1.5 (a))
Tyre worn close to legal limit/worn on edge All 3mm (5.2.3 (e))
body, axle and chassis corrosion
Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Oil leak, but not excessive engine and gearbox area (8.4.1 (a) (i))
body, axle and chassis corrosion
exhaust system corroded
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge at 2mm (5.2.3 (e))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge at 2mm and worn on inner edge (5.2.3 (e))
Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
engine cover fitted covering components in the engine bay
under tray covers fitted covering components in the underframe
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
front shock absorber gaiters split
Items removed from driver's view prior to test
both front shock absorber gators worn and split
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Honda Cr-v?
Based on 4,177,643 MOT tests across 304,403 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SY08 LMJ is a 2008 Honda Cr-v in Blue with a 2,204cc diesel engine. This vehicle has been through 16 MOT tests with a personal pass rate of 93.8%.
Across all 2008 Honda Cr-v models, the average MOT pass rate is 79.6% with a typical mileage of 90,548 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Honda Cr-v fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 62,925 recorded failures. If you're considering buying SY08 LMJ, it's worth having these areas checked by a mechanic before committing.
The Honda Cr-v typically stays on UK roads for around 29 years. At 18 years old, this Honda Cr-v is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of SY08 LMJ?
You can check the full history of SY08 LMJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SY08 LMJ registered?
SY08 LMJ is a 2008 Honda Cr-v, first registered on 3 March 2008.
Is SY08 LMJ safe to buy?
The MOT history for SY08 LMJ shows 16 tests with a 93.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SY08 LMJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SY08 LMJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.