MOT Status
ExpiredMileage
95,966 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))
Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced cental sill (7.1.1 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch / end of sill (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mounting point (5.3.6 (a) (i))
Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch by fuel filler (5.3.6 (a) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch / end of sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mounting point (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced central floor (7.1.1 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Fuel tank exhaust shield missing where fitted as original equipment creating a risk of fire (6.1.3 (e)) DANGEROUS
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge bald (5.2.3 (e))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Offside Headlamp aim too low (4.1.2 (a))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Offside Front Inner Tyre worn close to legal limit/worn on edge bald (5.2.3 (e))
Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Rear tyre tread cracking badly
n/side front tyre bald on inner edge
o/side rear tyre cracking and perrishing
rear axle rusting
All direction indicators not working (4.4.1 (a) (ii))
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
n/side front tyre bald on inner edge
o/side rear tyre cracking and perrishing
rear axle rusting
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill panel corroded with 30 cm of lower seatbelt fixing (7.1.1 (a) (i))
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt lower arm ball joint (5.3.4 (b) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill panel within 30 cm of suspension fixing (5.3.6 (a) (i))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement nearside and offside cracking and perishing (5.3.4 (a) (i))
Nearside Front Suspension arm ball joint dust cover severely deteriorated lower arm ball joint dust cover starting to perish (5.3.4 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn axle bushes starting to wear and split (5.1.2 (b) (i))
front subframe corroded
Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Tyre perrished
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside front brake excessively fluctuating (3.7.B.3)
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
Nearside Front Brake pipe excessively corroded (3.6.B.2c) DANGEROUS
Offside Front Brake pipe excessively corroded (3.6.B.2c) DANGEROUS
Nearside Rear Tyre perrished
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Tyre perrished
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
rear brake application uneven (3.7.B.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Tyre perrished
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Parking brake lever has little reserve travel (3.1.6b)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Inner Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp aim too high and too far to the right. (1.8)
Nearside Rear Mechanical brake component has restricted free movement (3.5.1k)
Offside Headlamp aim too high (1.8)
Offside Rear Mechanical brake component has restricted free movement (3.5.1k)
Offside Registration plate lamp not working (1.1.C.1d)
Windscreen washer provides insufficient washer liquid (8.2.3)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front front brake fluctuating, but not excessively (3.7.B.3)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Road wheel slightly damaged (4.2.A.1a)
Offside Front front brake fluctuating, but not excessively (3.7.B.3)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
exhaust showing corrosion amd hangers worn thin
slight bind on rear wheels
underside of vehicle showing corrosion
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
rear offside tyre starting to perish
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SY08 OUH is a 2008 Toyota Aygo in Silver with a 998cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 56%.
Across all 2008 Toyota Aygo models, the average MOT pass rate is 74.7% with a typical mileage of 54,541 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying SY08 OUH, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 18 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SY08 OUH?
You can check the full history of SY08 OUH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SY08 OUH registered?
SY08 OUH is a 2008 Toyota Aygo, first registered on 19 March 2008.
Is SY08 OUH safe to buy?
The MOT history for SY08 OUH shows 25 tests with a 56% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SY08 OUH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SY08 OUH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.