MOT Status
ExpiredMileage
103,863 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))
Offside Rear Service brake excessively binding (1.2.1 (f))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge Scrubbing inside edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced Starting to hole slightly on box section. (6.1.1 (c) (i))
Offside Rear Outer Vehicle structure is corroded but structural rigidity is not significantly reduced Sill starting to corrode and hole slightly. (6.1.1 (c) (i))
Rear Cross member is starting to corrode.
Underside in most areas is staring to corrode.
Brake pipes covered in grease
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Repairs on rear covered in underseal
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mounting (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mounting (5.3.6 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material slightly corroded (1.1.11 (c))
Outer sills corroded.
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Exhaust mounting defective rubber split (6.1.2 (a))
little reserve handbrake travel
Nearside Front Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))
Offside Front Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Position lamp not working (4.2.1 (a))
Rear Exhaust mounting defective rubber split (6.1.2 (a))
Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
rear tyres are perished
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
rear tyres are perished
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Brake pipe slightly corroded (3.6.B.2c)
Front Brake pad(s) wearing thin (3.5.1g)
n/s/f brake binding lightly
oil filter corroded and weaping
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
o/s/front tyre cut on tread
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Exhaust system not adequately supported (7.1.1)
o/s/front tyre cut on tread
Nearside Front Headlamp aim too low (1.8)
Nearside Front Headlamp insecure (1.7.3)
Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SY08 PCV is a 2008 Peugeot 107 in Red with a 998cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 60%.
Across all 2008 Peugeot 107 models, the average MOT pass rate is 74.1% with a typical mileage of 54,654 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying SY08 PCV, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 18 years old, this Peugeot 107 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SY08 PCV?
You can check the full history of SY08 PCV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SY08 PCV registered?
SY08 PCV is a 2008 Peugeot 107, first registered on 4 March 2008.
Is SY08 PCV safe to buy?
The MOT history for SY08 PCV shows 20 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SY08 PCV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SY08 PCV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.