MOT Status
ValidMileage
152,153 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
DPF light on
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive arch (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive arch (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Prop shaft flexible coupling slightly deteriorated (6.1.7 (d) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
TPMS light on
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Electronic stability control warning lamp indicates a fault (7.12 (e))
Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
DPF light on
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive arch (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive arch (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Prop shaft flexible coupling slightly deteriorated (6.1.7 (d) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
TPMS light on
Central Prop shaft flexible coupling slightly deteriorated (6.1.7 (d) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))
Nearside Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Nearside Suspension component mounting prescribed area is corroded but not considered excessive rear floor (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))
Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength boot floor (5.3.6 (a) (i))
Central Prop shaft flexible coupling slightly deteriorated (6.1.7 (d) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))
Nearside Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Nearside Suspension component mounting prescribed area is corroded but not considered excessive rear floor (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
rear exhaust joint rusty
slight fluctuating on front brake discs
underside rusty & showing age
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front lower crossmember (6.1.1 (c) (i))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
rear exhaust joint rusty
slight fluctuating on front brake discs
underside rusty & showing age
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
exhaust middle-rear joint rusty & deteriorating
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
exhaust middle-rear joint rusty & deteriorating
Offside Rear Child Seat fitted not allowing full inspection of adult belt ()
Nearside Rear Inner Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear brake disc in such a condition that it is seriously weakened brake surface breaking up (3.5.1i)
Offside Rear Inner Brake pad(s) less than 1.5 mm thick (3.5.1g)
Service brake juddering severely (3.7.C.2)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear fog lamp not working (1.3.2b)
How Reliable is the Honda Cr-v?
Based on 4,177,643 MOT tests across 304,403 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SY10 TYO is a 2010 Honda Cr-v in Blue with a 2,199cc diesel engine. This vehicle has been through 21 MOT tests with a personal pass rate of 66.7%.
Across all 2010 Honda Cr-v models, the average MOT pass rate is 82.9% with a typical mileage of 75,673 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Honda Cr-v fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 62,925 recorded failures. If you're considering buying SY10 TYO, it's worth having these areas checked by a mechanic before committing.
The Honda Cr-v typically stays on UK roads for around 29 years. At 16 years old, this Honda Cr-v is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of SY10 TYO?
You can check the full history of SY10 TYO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SY10 TYO registered?
SY10 TYO is a 2010 Honda Cr-v, first registered on 30 March 2010.
Is SY10 TYO safe to buy?
The MOT history for SY10 TYO shows 21 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SY10 TYO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SY10 TYO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.