MOT Status
ValidMileage
115,224 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Parking brake inoperative on one side (1.4.1 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Front Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Nearside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
little reserve travel at handbrake lever
dry under body
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Suspension component corroded but not seriously weakened rear axle (5.3.3 (b) (i))
Front Exhaust mounting defective corroded, all exhaust supports corroded (6.1.2 (a))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
high level brake light inop
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Headlamp aim too low (4.1.2 (a))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
high level brake light inop
Front Exhaust system insecure bracket corroded and broken (6.1.2 (a))
Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Front coil spring incorrectly seated
Exhaust system not adequately supported front bracket (7.1.1)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front strut top bearing noise but no play
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Front strut top bearing noise but no play
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Kia Picanto?
Based on 2,626,043 MOT tests across 229,767 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SY10 UAB is a 2010 Kia Picanto in Red with a 1,086cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 75%.
Across all 2010 Kia Picanto models, the average MOT pass rate is 74.5% with a typical mileage of 42,569 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Kia Picanto fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 41,453 recorded failures. If you're considering buying SY10 UAB, it's worth having these areas checked by a mechanic before committing.
The Kia Picanto typically stays on UK roads for around 22 years. At 16 years old, this Kia Picanto is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of SY10 UAB?
You can check the full history of SY10 UAB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SY10 UAB registered?
SY10 UAB is a 2010 Kia Picanto, first registered on 12 March 2010.
Is SY10 UAB safe to buy?
The MOT history for SY10 UAB shows 20 tests with a 75% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SY10 UAB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SY10 UAB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.