MOT Status
ValidMileage
86,344 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill corroding (5.3.6 (a) (i))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Inner Brake disc significantly and obviously worn (1.1.14 (a) (i))
Offside Front Inner Brake disc significantly and obviously worn (1.1.14 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Brake hose ferrule excessively corroded and likely to fail (1.1.12 (f) (ii)) DANGEROUS
Offside Rear Brake hose ferrule excessively corroded and likely to fail (1.1.12 (f) (ii)) DANGEROUS
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Brake pipe corroded, covered in grease or other material to flexy hose (1.1.11 (c))
Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at axle mount (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill excessively corroded (7.1.1 (a) (i))
Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at axle mount (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill excessively corroded (7.1.1 (a) (i))
Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Brake pipe corroded, covered in grease or other material to flexy hose (1.1.11 (c))
Exhaust mounting defective (6.1.2 (a))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Hazard warning switch inoperative (4.4.2 (a) (ii))
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting two holes in the inner and outer sill (6.2.2 (d) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Exhaust mounting defective (6.1.2 (a))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Brake hose has slight corrosion to ferrule Both front brake hoses (1.1.12 (f) (i))
Front Exhaust mounting defective (6.1.2 (a))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Both rear shock absorber casings heavily corroded
Rear Brake hose has slight corrosion to ferrule Both rear brake hoses (1.1.12 (f) (i))
Central Front Hazard warning switch inoperative (4.4.2 (a) (ii))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Axle mounting point (5.3.6 (a) (i))
Front Brake hose has slight corrosion to ferrule Both front brake hoses (1.1.12 (f) (i))
Front Exhaust mounting defective (6.1.2 (a))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Both rear shock absorber casings heavily corroded
Rear Brake hose has slight corrosion to ferrule Both rear brake hoses (1.1.12 (f) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Play in steering rack inner joint(s) ()
Offside Front Play in steering rack inner joint(s) ()
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Axle mounting (5.3.6 (a) (i))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Axle mounting (5.3.6 (a) (i))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Play in steering rack inner joint(s) ()
Offside Front Play in steering rack inner joint(s) ()
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Axle mounting (5.3.6 (a) (i))
Rear Brake pipe corroded, covered in grease or other material Both front to rear brake pipes coated in grease (1.1.11 (c))
Nearside Front Macpherson strut corroded and seriously weakened (5.3.3 (b) (i))
Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened Badly corroded & pitted (3.5.1i)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front brake disc worn, pitted or scored, but not seriously weakened Badly corroded & pitted (3.5.1i)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SY11 VBA is a 2011 Peugeot 107 in Grey with a 998cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 66.7%.
Across all 2011 Peugeot 107 models, the average MOT pass rate is 79.1% with a typical mileage of 47,205 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying SY11 VBA, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 15 years old, this Peugeot 107 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of SY11 VBA?
You can check the full history of SY11 VBA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SY11 VBA registered?
SY11 VBA is a 2011 Peugeot 107, first registered on 31 March 2011.
Is SY11 VBA safe to buy?
The MOT history for SY11 VBA shows 18 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SY11 VBA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SY11 VBA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.