MOT Status
ValidMileage
60,370 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mounintg onto body (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mounting onto body (5.3.6 (a) (i))
Central Rear Brake pipe excessively corroded x2 rear brake pipes at front off fuel tank (1.1.11 (c))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Rear Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength on axle (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mounting (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mounting (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area damaged but not considered excessive coil spring mounting on axle (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive coil spring mounting on axle on axle (5.3.6 (a) (i))
Emissions unable to be completed (8.2.1.2 (d))
Front Exhaust has a major leak of exhaust gases (6.1.2 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area damaged but not considered excessive coil spring mounting on axle (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive coil spring mounting on axle on axle (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced around axle mounting onto body (6.1.1 (c) (i))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced axle mounting onto body (6.1.1 (c) (i))
Central Front Exhaust has a major leak of exhaust gases front cox on exhaust leaking gases (6.1.2 (a))
Emissions unable to be completed due to gases leaking from exhaust (8.2.1.2 (d))
Nearside Front Service brake excessively fluctuating (1.2.1 (e))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Service brake excessively fluctuating (1.2.1 (e))
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced around axle mounting onto body (6.1.1 (c) (i))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced axle mounting onto body (6.1.1 (c) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material x2 brake pipes next to eachother (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive coil spring mounting on axle (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive offside rear coil spring mounting on axle (5.3.6 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Central Brake pipe corroded, covered in grease or other material x2 brake pipes along floor pan to rear (1.1.11 (c))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive shocker mounting point on rear axle (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive shocker mounting point on axle (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive on axle at coil spring mounting (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive at coil spring mounting (5.3.6 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
How Reliable is the Mazda 2?
Based on 1,902,862 MOT tests across 147,013 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SY12 SVV is a 2012 Mazda 2 in White with a 1,498cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 80%.
Across all 2012 Mazda 2 models, the average MOT pass rate is 78.9% with a typical mileage of 46,811 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 2 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 18,380 recorded failures. If you're considering buying SY12 SVV, it's worth having these areas checked by a mechanic before committing.
The Mazda 2 typically stays on UK roads for around 23 years. At 14 years old, this Mazda 2 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of SY12 SVV?
You can check the full history of SY12 SVV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SY12 SVV registered?
SY12 SVV is a 2012 Mazda 2, first registered on 17 March 2012.
Is SY12 SVV safe to buy?
The MOT history for SY12 SVV shows 15 tests with a 80% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SY12 SVV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SY12 SVV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.