MOT Status
ExpiredMileage
106,435 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Rear Drive shaft joint worn, but not excessively (6.1.7 (c) (i))
Front Integral body structure is corroded but structural rigidity is not significantly reduced crossmember (6.1.1 (c) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Service brake excessively binding (1.2.1 (f))
Central Rear Drive shaft joint worn, but not excessively (6.1.7 (c) (i))
Front Integral body structure is corroded but structural rigidity is not significantly reduced crossmember (6.1.1 (c) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front Integral body structure is corroded but structural rigidity is not significantly reduced crossmember (6.1.1 (c) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))
Exhaust has a major leak of exhaust gases at rear of silencer (6.1.2 (a))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above axle (6.1.1 (c) (i))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced at leaf spring anchor mounting (6.1.1 (c) (i))
Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced at leaf spring anchor mounting (6.1.1 (c) (i))
Front Integral body structure is corroded but structural rigidity is not significantly reduced crossmember (6.1.1 (c) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside and offside front and rear tyres worn close to the legal limit
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Rear Brake pipe slightly corroded (3.6.B.2c)
Brake pipe slightly corroded (3.6.B.2c)
Front Brake pipe slightly corroded (3.6.B.2c)
front brake discs and pads worn
How Reliable is the Mazda BT-50?
Based on 27,778 MOT tests across 1,760 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SY56 DTK is a 2006 Mazda BT-50 in Black with a 2,499cc diesel engine. This vehicle has been through 13 MOT tests with a personal pass rate of 84.6%.
Across all 2006 Mazda BT-50 models, the average MOT pass rate is 72.8% with a typical mileage of 87,596 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda BT-50 fails its MOT is brake pipe excessively corroded, accounting for 674 recorded failures. If you're considering buying SY56 DTK, it's worth having these areas checked by a mechanic before committing.
The Mazda BT-50 typically stays on UK roads for around 20 years. At 20 years old, this Mazda BT-50 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SY56 DTK?
You can check the full history of SY56 DTK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SY56 DTK registered?
SY56 DTK is a 2006 Mazda BT-50, first registered on 22 December 2006.
Is SY56 DTK safe to buy?
The MOT history for SY56 DTK shows 13 tests with a 84.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SY56 DTK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SY56 DTK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.