MOT Status
ExpiredMileage
63,151 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill areas (6.1.1 (c) (i))
Offside Front Brake hose excessively damaged (1.1.12 (b) (ii))
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill areas (6.1.1 (c) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Rear Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS
Offside Rear Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Brake performance unable to be tested due to osf hose condition (1.2.1 (g))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/floor (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))
Offside Front Brake hose excessively chafed (1.1.12 (b) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/floor (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))
Windscreen washer not working wiper blade not tested (3.5 (a))
Central Exhaust mounting defective (6.1.2 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Headlamp lens slightly defective both (4.1.1 (b) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill area . (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill area . (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Rear Coil spring corroded (5.3.1 (b) (i))
both inner sills corroded
osf head lamp condensation build up
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Rear Coil spring corroded (5.3.1 (b) (i))
both inner sills corroded
osf head lamp condensation build up
All shock absorbers corroded. Not seriously weakened.
Nearside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Axle mounting point (6.2.2 (d) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Wheel corroded
Offside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Axle mounting point (6.2.2 (d) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Wheel corroded
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Front Coil spring corroded both sides (5.3.1 (b) (i))
Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Coil spring corroded both sides (5.3.1 (b) (i))
exhaust system corroded
underside generally rusty
Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))
Offside Front Service brake excessively fluctuating (1.2.1 (e))
Nearside Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS
Offside Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Front Coil spring corroded both sides (5.3.1 (b) (i))
Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Coil spring corroded both sides (5.3.1 (b) (i))
exhaust system corroded
underside generally rusty
Suspension component mounting prescribed area is corroded but not considered excessive both outer sills at rear (2.4.A.3)
Nearside Front Brake pipe slightly corroded To rear @ rear flexi (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Both rear tyres perished and cracking
Nearside Front Sidewall damaged
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
nearside rear tyre wearing on the outer edge
offside rear tyre wearing on the outer edge
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp aim too low (1.8)
nearside rear tyre wearing on the outer edge
offside rear tyre wearing on the outer edge
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SY56 OXM is a 2006 Toyota Aygo in Red with a 998cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 69.6%.
Across all 2006 Toyota Aygo models, the average MOT pass rate is 73.6% with a typical mileage of 60,291 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying SY56 OXM, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 20 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SY56 OXM?
You can check the full history of SY56 OXM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SY56 OXM registered?
SY56 OXM is a 2006 Toyota Aygo, first registered on 15 September 2006.
Is SY56 OXM safe to buy?
The MOT history for SY56 OXM shows 23 tests with a 69.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SY56 OXM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SY56 OXM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.