2008 Peugeot 107

Central Rear Exhaust has a major leak of exhaust gases back box (6.1.2 (a))

Emissions not tested due to exhaust condition (8.2.1.2 (d))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Exhaust silencer insecure (8.1.1 (b) (i))

Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill to floor pan (7.1.1 (a) (i))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced radiator crossmember not attached (6.1.1 (c) (i))

Nearside Front Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced holed at rear mount (6.1.1 (c) (i))

Nearside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Nearside Rear Brake pipe excessively corroded from flexi to drum (1.1.11 (c))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill middle to rear (5.3.6 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill end in rear arch (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis at rear axle mounts (5.3.6 (a) (i))

Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill to floor pan holed (7.1.1 (a) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced radiator crossmember holed (6.1.1 (c) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced radiator crossmember holed (6.1.1 (c) (i))

Offside Front Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced holed at rear mount on top of cradle (6.1.1 (c) (i))

Offside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Rear Brake pipe excessively corroded from flexi to drum (1.1.11 (c))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill at rear (5.3.6 (a) (i))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis at rear axle mounts (5.3.6 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Stop lamp not working (1.2.1b)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

front brake application uneven (3.7.B.2)

Nearside Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Nearside Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Offside Registration plate lamp not working (1.1.C.1d)

Offside rear brake binding (3.7.B.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)