2020 Sinnis Apache Smr

Both front brake hoses not secured to bottom of L/H fork leg & L/H fork guard missing

Exhaust noisy (8.1.1 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake hose slightly deteriorated Front brake - front operated hose has parts of outer covering missing (1.1.12 (b) (ii))

Front Brake hose slightly deteriorated Rear operated / linked - front brake hose has all outer covering missing (1.1.12 (b) (ii))

Presented for test with all lights masked - test carried out according to daytime MOT regulations

Rear Brake indicates a slightly grabbing brake (1.2.1 (c))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement Rerar suspension linkage bearings have slight up & down play (5.3.4 (a) (i))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement Swinging arm bearings have slight play (5.3.4 (a) (i))

Headlamp aim too low (4.1.2 (a))

Drive chain excessively loose (6.1.7 (c) (i))

Front Brake excessively binding (1.2.1 (f))

Rear Footrest missing R & L Rear footrests missing (6.2.12 (a))

Throttle control functioning such that safe operation of the motorcycle is adversely affected Loose on handlebars (6.2.7 (a) (ii)) DANGEROUS

Both front brake hoses not secured to bottom of L/H fork leg & L/H fork guard missing

Exhaust noisy (8.1.1 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake hose slightly deteriorated Front brake - front operated hose has parts of outer covering missing (1.1.12 (b) (ii))

Front Brake hose slightly deteriorated Rear operated / linked - front brake hose has all outer covering missing (1.1.12 (b) (ii))

Rear Brake indicates a slightly grabbing brake (1.2.1 (c))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement Rerar suspension linkage bearings have slight up & down play (5.3.4 (a) (i))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement Swinging arm bearings have slight play (5.3.4 (a) (i))

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Brake lever is short but brake can still be readily applied (1.1.2 (d))

Front Brake binding but not excessively (1.2.1 (f))

Offside Front Footrest slightly loose (6.2.12 (a))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Drive chain excessively loose (6.1.7 (c) (i))

Drive chain worn to excess (6.1.7 (c) (i))

Nearside Rear Footrest missing (6.2.12 (a))

Front Brake lining(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm 130/70/17 (5.2.3 (e)) DANGEROUS

Front Brake disc worn, but not excessively boarderline pass (1.1.14 (a) (i))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Rear Exhaust has a minor leak of exhaust gases poor condition (6.1.2 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake lever worn, but not excessively slightly bent (1.1.15 (b))

Rear Brake lining(s) close to minimum limit (1.1.13 (a))

Drive chain excessively loose (6.1.7 (c) (i))

Drive chain worn to excess (6.1.7 (c) (i))

Rear reflector missing covered by "L" plate (4.8.2 (a) (ii))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake lever worn, but not excessively slightly bent (1.1.15 (b))

Rear Brake lining(s) close to minimum limit (1.1.13 (a))