2003 Subaru Impreza

Front Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

slight corrosion underbody

underseal applied full underbody and all suspension components

Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Coil spring corroded (5.3.1 (b) (i))

Exhaust mounting defective (6.1.2 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Shock absorbers has light misting of oil (5.3.2 (b))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Shock absorbers has light misting of oil (5.3.2 (b))

Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Coil spring corroded (5.3.1 (b) (i))

Exhaust mounting defective (6.1.2 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Central Front subframe damaged

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced front and rear sills (6.1.1 (c) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced front and rear sills (6.1.1 (c) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust emits excessive dense blue smoke during acceleration (8.2.1.2 (g))

Horn not working (7.7 (a))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Headlamp insecure (4.1.1 (c))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Shock absorbers has an excessively worn bush were attachs to hub (5.3.2 (c))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Headlamp insecure (4.1.1 (c))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Front Sub-frame damaged but not seriously weakened (5.3.3 (b) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))