MOT Status
ExpiredMileage
120,910 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
All direction indicators slightly discoloured (4.4.3 (a))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
All direction indicators slightly discoloured (4.4.3 (a))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Front Outer Drive shaft joint constant velocity boot severely deteriorated both sides (6.1.7 (g) (i))
Nearside Rear Outer Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bushes both sides (5.3.4 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))
Front Outer Drive shaft joint constant velocity boot severely deteriorated both sides (6.1.7 (g) (i))
Nearside Rear Outer Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Brake hose has slight corrosion to ferrule both sides flexi hoses (1.1.12 (f) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bushes both sides (5.3.4 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Front outer CV boots slightly insecure
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Rear arches corroded
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Front Exhaust has a major leak of exhaust gases (6.1.2 (a))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))
Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords both (5.2.3 (d) (i))
Front outer CV boots slightly insecure
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Rear Tyre slightly damaged/cracking or perishing both (5.2.3 (d) (ii))
Rear Tyre worn close to legal limit/worn on edge both (5.2.3 (e))
Rear arches corroded
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear arches corroded
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Rear Bumper insecure (6.1.4 (a) (i))
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Rear Tyre worn close to the legal limit both (4.1.E.1)
Rear both rear wheel arches corroded
centre and rear exhaust silencers deteriorated
Front Headlamp aim too low both (1.8)
Front Subframe mounting prescribed area is excessively corroded floor ares both sides (2.4.A.3)
Nearside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Rear Tyre worn close to the legal limit both (4.1.E.1)
Rear both rear wheel arches corroded
centre and rear exhaust silencers deteriorated
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
osr wheel arch corroded
Nearside Front jacking point corroded
both rear tyre treads getting low
Nearside Rear Seat belt anchorage prescribed area is excessively corroded arch /sill badly corroded (5.2.6)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Seat belt anchorage prescribed area is excessively corroded arch/sill badly corroded (5.2.6)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front jacking point corroded
both rear tyre treads getting low
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Stop lamp not working (1.2.1b)
Offside Front Brake pad(s) insecure (3.5.1g)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
rear exhaust slightly deteriorated
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Stop lamp not working (1.2.1b)
Offside Headlamp aim too high (1.8)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Outer Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Power steering component(s) leaking (2.3.3b)
Power steering pump drive system defective (2.3.6)
Offside Outer Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Offside Headlamp aim too high (1.8)
Offside Outer Front Brake pad(s) wearing thin (3.5.1g)
Offside Stop lamp not working (1.2.1b)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Headlamp aim too low (1.8)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
How Reliable is the Rover 414?
Based on 376,618 MOT tests across 66,719 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
T162 SAA is a 1999 Rover 414 in Red with a 1,396cc petrol engine. This vehicle has been through 29 MOT tests with a personal pass rate of 58.6%.
Across all 1999 Rover 414 models, the average MOT pass rate is 67.5% with a typical mileage of 68,468 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Rover 414 fails its MOT is brake pipe excessively corroded, accounting for 28,909 recorded failures. If you're considering buying T162 SAA, it's worth having these areas checked by a mechanic before committing.
The Rover 414 typically stays on UK roads for around 35 years. At 27 years old, this Rover 414 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of T162 SAA?
You can check the full history of T162 SAA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was T162 SAA registered?
T162 SAA is a 1999 Rover 414, first registered on 1 March 1999.
Is T162 SAA safe to buy?
The MOT history for T162 SAA shows 29 tests with a 58.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does T162 SAA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on T162 SAA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.