2004 MG ZS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Integral body structure is corroded but structural rigidity is not significantly reduced floor (6.1.1 (c) (i))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sills (6.2.2 (d) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))

Rear Passenger seat(s) missing at time of test ()

Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Horn not working (7.7 (a) (ii))

Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Rear Brake performance not tested brake binding (1.2.1 (g))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Position lamp incorrect colour (4.2.3 (a) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Position lamp incorrect colour (4.2.3 (a) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear Exhaust system insecure (6.1.2 (a))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Suspension arm pin or bush worn but not resulting in excessive movement rear trailing arm bushes (5.3.4 (a) (i))

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

both front under sill corroded

Offside Front Suspension component mounting prescribed area is excessively corroded inner arch (2.4.A.3)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

both front under sill corroded

floors rusty/underside rusty

oil leaks

Offside Front Upper Front suspension retaining device missing ball joint (2.5.A.4)

floors rusty/underside rusty

oil leaks

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Body has slight corrosion (6.1.B.2)

all four road wheels slightly buckled

clutch pedal rubber missing

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

o/s/rear tyre starting to crack and split

Nearside Headlamp aim too low (1.8)

Offside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Offside Headlamp aim too low (1.8)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

o/s/rear tyre starting to crack and split

Nearside Headlamp aim too high (1.8)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Headlamp aim too high (1.8)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front brake disc slightly pitted (3.5.1h)

Nearside Rear brake disc slightly pitted (3.5.1h)

Offside Front brake disc slightly pitted (3.5.1h)

Offside Rear brake disc slightly pitted (3.5.1h)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

clutch pedal rubber missing