1999 Fiat Ducato

Dipswitch does not operate immediately when selected on main beam (4.1.3 (b))

Nearside Front Brake pipe excessively corroded two brake pipes corroded (1.1.11 (c))

Nearside Front Hydraulic brake calliper inadequately mounted lower caliper slide (1.1.16 (c) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis legs and outrigger holed (5.3.6 (a) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Brake pipe likely to become detached or damaged pipe insecure (1.1.11 (d) (ii))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis legs holed (5.3.6 (a) (i))

Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Windscreen wiper does not clear the windscreen effectively wiper blades torn (3.4 (b) (ii))

Offside Rear Leaf spring main leaf fractured broken at rear mount (5.3.1 (b) (ii)) DANGEROUS

Nearside Front Lower Steering linkage ball joint has slight play (2.1.3 (b) (i))

Offside Front Lower Steering linkage ball joint has slight play (2.1.3 (b) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Trailer electrical socket wiring insulation damaged or deteriorated (4.10 (b) (i))

Play in steering rack inner joint(s) ()

Brake pedal has insufficient reserve travel (1.1.2 (a))

Brake pipe excessively corroded both at o/s/f (1.1.11 (c))

Brake pipe excessively corroded both to joins at n/s/f (1.1.11 (c))

Nearside Body component corroded and likely to cause injury side door (6.2.1 (a) (i))

Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Service brake excessively fluctuating o/s/f and n/s/f (1.2.1 (e))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s/r and n/s/r inner and outer sills (5.3.6 (a) (i))

Service brake has no recorded effort at a wheel o/s/r and n/s/r (1.2.1 (a) (ii)) DANGEROUS

Offside Front Outer cv boot leaking

Offside Front floor holed

Oil leak, but not excessive (8.4.1 (a) (i))

rear arches corroded/holed

Front Brake disc worn, pitted or scored, but not seriously weakened inside edges (1.1.14 (a) (ii))

Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced rear outer sill soft but not excessive but outwith prescribed area (6.1.1 (c) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened inside edges (1.1.14 (a) (ii))

Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Inner Vehicle structure is fractured and structural rigidity is significantly reduced sill holed (6.1.1 (a) (i))

Offside Front Inner Vehicle structure is fractured and structural rigidity is significantly reduced sill holed (6.1.1 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced rear outer sill soft but not excessive but outwith prescribed area (6.1.1 (c) (i))

Body has slight corrosion underneath soft (6.1.B.2)

Nearside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis both sides (2.4.A.3)

Nearside Direction indicator incorrect colour (1.4.A.2f)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Front wheel bearing has excessive play (2.5.A.3c)

Nearside Front Upper Suspension component mounting prescribed area is excessively corroded next to spring (2.4.A.3)

Nearside Side repeater not working (1.4.A.2c)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Nearside Suspension component mounting prescribed area is excessively corroded sill chassis (2.4.A.3)

Offside Front Upper Suspension component mounting prescribed area is excessively corroded next to spring (2.4.A.3)

Offside Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Suspension component mounting prescribed area is excessively corroded sill to chassis (2.4.A.3)

Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis both sides (2.4.A.3)

Brake load sensing valve seized (3.6.E.3)

Nearside Front Brake pipe excessively corroded both pipes (3.6.B.2c)

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Front Subframe mounting prescribed area is excessively corroded front of sill at chassis (2.4.A.3)

Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded spring mounting area (2.4.A.3)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Side repeater not working (1.4.A.2c)

Offside Front Subframe mounting prescribed area is excessively corroded front of sill at chassis (2.4.A.3)

Offside Front Upper Suspension spring mounting prescribed area is excessively corroded spring mounting (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Trailer electrical socket damaged so that lead cannot be securely connected (1.9.3b)

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Vehicle structure has slight corrosion chassis leg near engine mounting (6.1.A.1)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive rearmost (2.4.A.3)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive rearmost (2.4.A.3)

Oil leak ()

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

Front Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front front brake binding (3.7.B.1)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Offside Rear Front position lamp(s) not working (1.1.A.3b)

Rear Shock absorber has a serious fluid leak (2.7.3)

Registration plate lamp not working (1.1.C.1d)

Front front brake application uneven (3.7.B.2)

Horn not loud enough to be heard by another road user (1.6.2b)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Rear wheel bearing has excessive play (2.6.2)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Steering rack gaiter split (2.2.D.2d)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Rear Shock absorber has a serious fluid leak (2.7.3)

oil leak from engine

vehicle underside showing signs of surface rust

Exhaust system not adequately supported (7.1.1)

Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Offside Front All position lamps not working (1.1.A.3b)

Rear Rear wheel bearing has excessive play (2.6.2)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Rear wheel bearing has slight play (2.6.2)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Horn not working (1.6.2a)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Rear wheel bearing has slight play (2.6.2)

Brake hose slightly deteriorated (3.6.B.4d)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Registration plate lamp not working (1.1.5c)

Nearside rear brake recording little or no effort (3.7.B.5a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Stop lamp not working (1.2.1b)

Front Brake pad(s) wearing thin (3.5.1g)

both front in indicators slightly discoloured

both rear wheel bearings slight play

offside mirror cover insecure

Offside Power steering pipe(s) or hose(s) fouling other parts of the vehicle (2.3.2)

Offside Steering rack gaiter split (2.2.D.2d)

Front Direction indicator slightly discoloured (1.4.A.2f)

Vehicle structure has slight corrosion (6.1.A.1)

front brake pads getting low

slight play in both rear wheel bearings

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear Leaf spring has excessive wear in an anchor pin and/or bush (2.4.B.2)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Front Brake pad(s) wearing thin (3.5.1g)

slight play in both rear wheel bearings