1999 Honda CBR1100XX

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Brake disc worn, pitted or scored, but not seriously weakened Both front pitted (1.1.14 (a) (ii))

Clutch fluid level low

Offside Front Brake hose has slight corrosion to ferrules (1.1.12 (f) (i))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Brake disc worn, pitted or scored, but not seriously weakened Pitted (1.1.14 (a) (ii))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Lower Suspension corroded but not seriously weakened (5.3.3 (b) (i))

Rear Road spring corroded (5.3.1 (b) (i))

Steering headbearing slightly stiff or notchy Notchy (2.2.2 (f) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (S) pitting (1.1.14 (a) (ii))

Front Shock absorber has slight external damage to the casing (S) stanchions (5.3.2 (b))

Rear Brake disc worn, pitted or scored, but not seriously weakened pitting (1.1.14 (a) (ii))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Steering headbearing slightly stiff or notchy Notchy (2.2.2 (f) (i))

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Front wheel bearings are slightly rough (2.3.5b)

Centre Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Roller brake test indicates a binding brake (3.3.A1a)

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Nail in rear tyre

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))