MOT Status
ExpiredMileage
131,260 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded upper wheel arch multi spots (5.2.6)
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded upper wheel arch multi spots (2.4.A.3)
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Steering rack gaiter split (2.2.D.2d)
Offside Front Seat belt anchorage prescribed area is excessively corroded floor pan (5.2.6)
Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded upper wheel arch multi spots (5.2.6)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded lower wheel arch multi spots (2.4.A.3)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded upper wheel arch multi spots (2.4.A.3)
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Central Exhaust has a minor leak of exhaust gases (7.1.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Outer Suspension component mounting prescribed area is corroded but not considered excessive & inner sill (2.4.A.3)
Nearside Rear Inner Suspension component mounting prescribed area repaired, but not inappropriately wheel arch poor weld repair (2.4.A.3)
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Parking brake lever has little reserve travel on limit (3.1.6b)
both windscreen wipes poor
general underside corrosion to body chassis/suspension & steering components
power steering pipes into pump seeping oil
Offside Front Brake pipe slightly corroded (3.6.B.2c)
offside rear inner wheel arch corroded
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Headlamp aim too high (1.8)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
offside rear inner wheel arch corroded
Rear Brake pad(s) wearing thin (3.5.1g)
offside front floor corroded
Nearside Inner Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Inner Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Outer Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Registration plate lamp not working (1.1.C.1d)
Rear Brake pad(s) wearing thin (3.5.1g)
offside front floor corroded
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Outer Rear Brake pad(s) wearing thin (3.5.1g)
O/S/R brake slightly grabbing
O/S/R tyre wearing inner edge
Surface corrosion both inner sills and N/S/R floor and general repairs
rear brake discs poor condition
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Outer Rear Brake pad(s) wearing thin (3.5.1g)
O/S/R brake slightly grabbing
O/S/R tyre wearing inner edge
Surface corrosion both inner sills and N/S/R floor and general repairs
Windscreen wiper does not clear the windscreen effectively (8.2.2)
rear brake discs poor condition
see previous test for advisories
Nearside Front coil spring broken (2.4.C.1a)
Nearside Inner Rear Upper Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Inner Rear Upper Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Inner Rear Upper Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Inner Rear Upper Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
O/S/R brake slightly grabbing
engine noisey
general chassis curface corrosion/repairs
rear brake discs poor condition
repairs to o/s rear inner wheelarch heavily undersealed
Offside Inner Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside rear brake binding slightly
Offside rear brake disc slightly corroded
Front registration plate deteriorated (6.3.1d)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Brake pipe inadequately supported (3.6.B.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Brake pipe inadequately supported (3.6.B.1)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Power steering component(s) leaking (2.3.3b)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Headlamp aim too high (1.8)
Offside rear brake binding slightly
Offside rear brake disc slightly corroded
Front Brake pad(s) wearing thin (3.5.1g)
Oil leak
rear discs slightly corroded slightly scored
Brake pipe excessively corroded (3.6.B.2c)
Rear registration plate deteriorated (6.3.1d)
Front Brake pad(s) wearing thin (3.5.1g)
Oil leak
rear discs slightly corroded slightly scored
brake pipes \brake pads wearing\rear brake discs slightly scored and corroded\
fluid leak at front of car
outer sills corrodeing
Nearside Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
brake pipes \brake pads wearing\rear brake discs slightly scored and corroded\
fluid leak at front of car
Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Front Exhaust system not adequately supported (7.1.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp aim too low (1.8)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Headlamp aim too low (1.8)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front constant velocity joint gaiter split (2.5.C.1a)
Offside Front constant velocity joint gaiter split (2.5.C.1a)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
nearside rear & offside rear shock absorbers rubber dust covers deteriorating / split †
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
nearside rear & offside rear shock absorbers rubber dust covers deteriorating / split †
How Reliable is the Nissan Almera?
Based on 2,976,239 MOT tests across 231,560 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
T210 JWL is a 1999 Nissan Almera in Red with a 1,597cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 47.8%.
Across all 1999 Nissan Almera models, the average MOT pass rate is 67.7% with a typical mileage of 74,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Nissan Almera fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 141,538 recorded failures. If you're considering buying T210 JWL, it's worth having these areas checked by a mechanic before committing.
The Nissan Almera typically stays on UK roads for around 30 years. At 27 years old, this Nissan Almera is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of T210 JWL?
You can check the full history of T210 JWL by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was T210 JWL registered?
T210 JWL is a 1999 Nissan Almera, first registered on 19 August 1999.
Is T210 JWL safe to buy?
The MOT history for T210 JWL shows 23 tests with a 47.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does T210 JWL have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on T210 JWL. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.