MOT Status
ExpiredMileage
165,528 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Fuel pipe/s corroded
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Oil leak
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Fuel pipe/s corroded
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Oil leak
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Nearside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front wheel bearing rough when rotated (2.5.A.2)
Offside Stop lamp not working (1.2.1b)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Drive shaft uj which forms part of the suspension has slight play in a universal joint (2.4.G.4b)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Drive shaft uj which forms part of the suspension has slight play in a universal joint (2.4.G.4b)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
offside front tyre worn on inner edge
Nearside Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Nearside Inner Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Drive shaft uj which forms part of the suspension has slight play in a universal joint (2.4.G.4b)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Drive shaft uj which forms part of the suspension has slight play in a universal joint (2.4.G.4b)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
offside front tyre worn on inner edge
Nearside Front Track rod end ball joint has slight play (2.2.B.1f)
Nearside Rear Drive shaft uj which forms part of the suspension has slight play in a universal joint (2.4.G.4b)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Drive shaft uj which forms part of the suspension has slight play in a universal joint (2.4.G.4b)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Track rod end ball joint has slight play (2.2.B.1f)
Nearside Rear Drive shaft uj which forms part of the suspension has slight play in a universal joint (2.4.G.4b)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Drive shaft uj which forms part of the suspension has slight play in a universal joint (2.4.G.4b)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Drive shaft uj which forms part of the suspension has slight play in a universal joint (2.4.G.4b)
Offside Rear Drive shaft uj which forms part of the suspension has slight play in a universal joint (2.4.G.4b)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
offside front tyre worn on inner edge
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre has ply or cords exposed (4.1.D.1b)
Registration plate lamp not working (1.1.5c)
How Reliable is the Jaguar Sovereign?
Based on 21,315 MOT tests across 2,301 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
T221 CBW is a 1999 Jaguar Sovereign in Green with a 3,996cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 56.3%.
Across all 1999 Jaguar Sovereign models, the average MOT pass rate is 75.2% with a typical mileage of 91,140 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Jaguar Sovereign fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 998 recorded failures. If you're considering buying T221 CBW, it's worth having these areas checked by a mechanic before committing.
The Jaguar Sovereign typically stays on UK roads for around 42 years. At 27 years old, this Jaguar Sovereign is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of T221 CBW?
You can check the full history of T221 CBW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was T221 CBW registered?
T221 CBW is a 1999 Jaguar Sovereign, first registered on 10 March 1999.
Is T221 CBW safe to buy?
The MOT history for T221 CBW shows 16 tests with a 56.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does T221 CBW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on T221 CBW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.