MOT Status
ExpiredMileage
88,624 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Front Windscreen wiper does not clear the windscreen effectively Both (3.4 (b) (ii))
Coolant leak ()
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Service brake grabbing slightly (1.2.1 (c))
Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced Sill, inner wheel arch (6.1.1 (c) (i))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Front Side repeater slightly discoloured (4.4.3 (a))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Front Side repeater slightly discoloured (4.4.3 (a))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front Registration plate missing (0.1 (a))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Parking brake inoperative on one side (1.4.1 (a))
Offside Rear Brakes imbalanced across an axle low reading (1.2.1 (b) (i))
Parking (secondary brake) on a single line braking system imbalanced across an axle Axle 1 (1.3.1 (b) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Emissions not tested (8.2.1.2 (d))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Direction indicator not working (4.4.1 (a) (ii))
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Windscreen washer not working (3.5 (a))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced underbody and sills corroded in various areas (6.1.1 (c) (i))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Suspension component mounting prescribed area is corroded but not considered excessive both front and both rear areas slightly corroded (5.3.6 (a) (i))
All direction indicators not working (4.4.1 (a) (ii))
Horn not working (7.7 (a) (ii))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Integral body structure is corroded but structural rigidity is not significantly reduced underbody and sills corroded in various areas (6.1.1 (c) (i))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Suspension component mounting prescribed area is corroded but not considered excessive both front and both rear areas slightly corroded (5.3.6 (a) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Nearside Front Direction indicator not working (4.4.1 (a) (ii))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Side repeater not working (4.4.1 (a) (ii))
Rear fog lamp not working (4.5.1 (a) (ii))
Seat belt anchorage prescribed area strength or continuity significantly reduced central floor area/transmission tunnel (7.1.1 (a) (i))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
body has slight corrosion in various areas,some close to prescribed areas
Body has slight corrosion (6.1.B.2)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Seat belt anchorage prescribed area is corroded but not considered excessive both inner areas on transmission tunnel (5.2.6)
Body has slight corrosion (6.1.B.2)
Horn not working (1.6.2a)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Seat belt anchorage prescribed area is corroded but not considered excessive both inner areas on transmission tunnel (5.2.6)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Front Direction indicator incorrect colour (1.4.A.2f)
Nearside Front Sub-frame fractured (2.4.G.1)
Nearside Rear Seat belt locking mechanism does not secure or release (5.2.5a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded inner sill/floor (5.2.6)
Nearside Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)
Nearside Stop lamp not working (1.2.1b)
Offside Headlamp aim too low (1.8)
Windscreen washer provides insufficient washer liquid (8.2.3)
Body has slight corrosion (6.1.B.2)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Front registration plate deteriorated (6.3.1d)
Horn not working (1.6.2a)
Nearside Front Direction indicator not working (1.4.A.2c)
Nearside Front Front wheel bearing has excessive play (2.5.A.3c)
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Steering rack gaiter split (2.2.D.2d)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Direction indicator not working (1.4.A.2c)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Stop lamp not working (1.2.1b)
Nearside Front Direction indicator not working (1.4.A.2c)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Headlamp not working on main beam (1.7.5a)
Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Suspension arm has excessive play in a ball joint (2.4.G.2)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
o/s centre floor has hole
o/s rear subfame damage
Offside Rear Stop lamp not working (1.2.1b)
Horn not working (1.6.2a)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Oil leak
Oil leak
Horn not working (1.6.2a)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Oil leak
Nearside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear wheel bearing has slight play (2.6.2)
Horn not working (1.6.2a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Headlamp aim too high (1.8)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp aim too high (1.8)
Offside Registration plate lamp not working (1.1.5c)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
rear brake application uneven (3.7.B.2)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear wheel bearing has slight play (2.6.2)
Oil leak
nearside-offside front tyre's worn on inner edge
Nearside Front Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Headlamp aim too high (1.8)
Offside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Oil leak
nearside-offside front tyre's worn on inner edge
offside front floor corroded not within prescribed area
Oil leak
offside front corroded not within prescribed area
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Oil leak
offside front corroded not within prescribed area
Horn not working (1.6.2a)
Nearside Front Sub-frame rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Headlamp aim beam image kick up to the offside (1.8)
Nearside rear brake recording little or no effort (3.7.B.5a)
Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)
Offside Front Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)
How Reliable is the Rover Mini?
Based on 519,169 MOT tests across 45,631 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
T232 XPA is a 1999 Rover Mini in Green with a 1,275cc petrol engine. This vehicle has been through 38 MOT tests with a personal pass rate of 44.7%.
Across all 1999 Rover Mini models, the average MOT pass rate is 70.2% with a typical mileage of 44,443 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Rover Mini fails its MOT is subframe mounting prescribed area is excessively corroded, accounting for 32,036 recorded failures. If you're considering buying T232 XPA, it's worth having these areas checked by a mechanic before committing.
The Rover Mini typically stays on UK roads for around 47 years. At 27 years old, this Rover Mini is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of T232 XPA?
You can check the full history of T232 XPA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was T232 XPA registered?
T232 XPA is a 1999 Rover Mini, first registered on 23 July 1999.
Is T232 XPA safe to buy?
The MOT history for T232 XPA shows 38 tests with a 44.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does T232 XPA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on T232 XPA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.