MOT Status
ValidMileage
224,569 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Outer Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 195/70/R15C (5.2.3 (d) (i))
Nearside Rear Coil spring mounting corroded and seriously weakened (5.3.1 (b) (i))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Coil spring mounting corroded and seriously weakened (5.3.1 (b) (i))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Rear fog lamp light intensity significantly reduced (4.5.4 (a))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Power steering component has slight seepage from a component (2.1.5 (a))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Hydraulic brake calliper leaking (1.1.16 (b) (i))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Brake lever has insufficient reserve travel (1.1.2 (a))
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis to inner sill (6.2.2 (d) (i))
Nearside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis to inner sill (6.2.2 (d) (i))
Offside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting end sill pannel (6.2.2 (d) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Service brake efficiency below requirements (1.2.2 (a) (i))
Nearside Rear Tyre tread depth below requirements of 1.6mm 1957015 (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm 1957015 (5.2.3 (e)) DANGEROUS
Nearside Rear light lens damaged
Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Rear fog lamp lens damaged
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Inner Brake disc significantly and obviously worn (1.1.14 (a) (i))
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting central inner sill within seat belt mount holed (6.2.2 (d) (i))
Nearside Front Service brake imbalanced across an axle (1.2.1 (b) (i))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Inner Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis end pannel support bar corroded (6.2.2 (d) (i))
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting end chassis support bar corroded (6.2.2 (d) (i))
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill and rigger holed (6.2.2 (d) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Rear Suspension component pin or bush likely to become detached bump stop missing (5.3.4 (a) (ii)) DANGEROUS
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Front Service brake binding but not excessively (1.2.1 (f))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Outer Suspension arm ball joint has slight play (5.3.4 (a) (i))
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
front tyres perished
rear cross member slightly corroded
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Offside Front Position lamp not working (4.2.1 (a))
Offside Front Service brake binding but not excessively (1.2.1 (f))
front tyres perished
rear cross member slightly corroded
Central Seat belt slightly damaged centre seat belt middle row (7.1.2 (b) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear cross member corroded
Windscreen damaged but not adversely affecting driver's view chip (3.2 (a) (i))
Nearside Front Headlamp aim not tested No beam image (4.1.2 (b))
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Headlamp aim not tested No beam image (4.1.2 (b))
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i))
Central Seat belt slightly damaged centre seat belt middle row (7.1.2 (b) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear cross member corroded
Windscreen damaged but not adversely affecting driver's view chip (3.2 (a) (i))
Nearside Front Lower Ball joint has slight play (2.2.B.1f)
Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement drop link (2.4.G.2)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Front Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Mazda MPV?
Based on 44,611 MOT tests across 3,157 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
T244 JSS is a 1999 Mazda MPV in Silver with a 2,261cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 65%.
Across all 1999 Mazda MPV models, the average MOT pass rate is 68.2% with a typical mileage of 110,643 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda MPV fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 1,975 recorded failures. If you're considering buying T244 JSS, it's worth having these areas checked by a mechanic before committing.
The Mazda MPV typically stays on UK roads for around 31 years. At 27 years old, this Mazda MPV is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of T244 JSS?
You can check the full history of T244 JSS by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was T244 JSS registered?
T244 JSS is a 1999 Mazda MPV, first registered on 31 December 1999.
Is T244 JSS safe to buy?
The MOT history for T244 JSS shows 20 tests with a 65% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does T244 JSS have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on T244 JSS. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.