MOT Status
ExpiredMileage
63,963 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust has a major leak of exhaust gases (7.1.2)
Headlamp switch faulty (1.7.1)
Nearside Headlamp aim too high (1.8)
Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Axle beam distorted (2.5.A.5b)
Nearside Rear Rear wheel bearing rough when rotated (2.6.1)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre fouling a part of the vehicle (4.1.D.2)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Headlamp aim too low (1.8)
Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
rust & corrosion in various places
Brake servo corroded but not excessively weakened (3.6.A.2b)
Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front coil spring corroded (2.4.C.1b)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
off side rear tyre perishing
Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Brake servo corroded but not excessively weakened (3.6.A.2b)
Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front coil spring corroded (2.4.C.1b)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
off side rear tyre perishing
Brake actuating linkage mounting prescribed area is corroded but not considered excessive (3.3.A.2)
Brake hose has slight corrosion to ferrules (3.6.B.4e)
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Front coil spring corroded (2.4.C.1b)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Tyre worn close to the legal limit (4.1.E.1)
off side rear tyre perishing
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Brake actuating linkage mounting prescribed area is corroded but not considered excessive (3.3.A.2)
Brake hose has slight corrosion to ferrules (3.6.B.4e)
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Front coil spring corroded (2.4.C.1b)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Tyre worn close to the legal limit (4.1.E.1)
off side rear tyre perishing
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Brake servo corroded but not excessively weakened (3.6.A.2b)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
coil spring corroded (2.4.C.1b)
off side rear tyre perishing
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Outer Front constant velocity joint gaiter split (2.5.C.1a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Brake servo corroded but not excessively weakened (3.6.A.2b)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
coil spring corroded (2.4.C.1b)
off side rear tyre perishing
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front coil spring corroded (2.4.C.1b)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
n/s & o/s inner sills corroding.
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front coil spring corroded (2.4.C.1b)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
n/s & o/s inner sills corroding.
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Outer Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Offside Outer Front constant velocity joint gaiter split (2.5.C.1a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Outer Front constant velocity joint gaiter split (2.5.C.1a)
Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
How Reliable is the Vauxhall Corsa?
Based on 26,893,546 MOT tests across 2,075,660 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
T246 KEP is a 1999 Vauxhall Corsa in Silver with a 1,199cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 50%.
Across all 1999 Vauxhall Corsa models, the average MOT pass rate is 65.1% with a typical mileage of 65,940 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Vauxhall Corsa fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 835,831 recorded failures. If you're considering buying T246 KEP, it's worth having these areas checked by a mechanic before committing.
The Vauxhall Corsa typically stays on UK roads for around 33 years. At 27 years old, this Vauxhall Corsa is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of T246 KEP?
You can check the full history of T246 KEP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was T246 KEP registered?
T246 KEP is a 1999 Vauxhall Corsa, first registered on 3 March 1999.
Is T246 KEP safe to buy?
The MOT history for T246 KEP shows 16 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does T246 KEP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on T246 KEP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.