1999 Suzuki Swift

Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Offside Rear Rear wheel bearing has excessive play (2.6.2)

Offside Rear Rear wheel bearing rough when rotated (2.6.1)

Offside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2) DANGEROUS

all steel rear brake pipes corroding

front x-member and inner wings corroding

rear suspension arms corroding

track rod end gaiters deteriorating

Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Offside Front coil spring incomplete (2.4.C.1a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Front registration plate letter/figure incomplete (6.3.1c)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Inner Rear Brake pipe slightly corroded (3.6.B.2c)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too low (1.8)

Nearside Rear Rear wheel bearing rough when rotated (2.6.1)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Outer Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Rear wheel bearing rough when rotated (2.6.1)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Inner Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front position lamp(s) not working (1.1.A.3b)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front brake disc excessively pitted (3.5.1h)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front brake disc excessively pitted (3.5.1h)

Offside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear wheel bearing rough when rotated (2.6.1)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

brake disc excessively pitted (3.5.1h)

Exhaust has part of the system slightly deteriorated (7.1.1a)

corrosion on all rear suspension components

heavy corrosion on all offside and nearside front suspension components and subframe

heavy corrosion on front lower body crossmember below radiator

nearside front and rear and offside front and rear brake hose metal ferrules corroded

slight roughness in nearside rear wheel bearing

Offside Front Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)