1999 Honda Cr-v

Emissions not tested (8.2.2.2 (e))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Headlamp aim not tested (4.1.2 (b))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Suspension arm pin or bush excessively worn trailing arm front bush (5.3.4 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm front bush (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge 3mm and worn on edges (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Spare tyre defective ()

Vehicles internal headlight adjuster altered to recheck lights ()

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Lower Suspension arm pin or bush excessively worn inner (5.3.4 (a) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

plastic sill covers fitted not allowing full view of metal sills

Central Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Upper Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Outer Brake pad(s) wearing thin worn more than others (3.5.1g)

Front Windscreen wiper does not clear the windscreen effectively Both (8.2.2)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Upper Suspension arm locating pin locking device missing split pin (2.4.G.3b)

Offside Rear Stop lamp not working (1.2.1b)

Nearside Front Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Outer Brake pad(s) wearing thin worn more than others (3.5.1g)

Nearside Rear Lower Anti-roll bar has slight play in a ball joint (2.4.G.2)

Offside Front Lower Anti-roll bar has slight play in a ball joint (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Nearside Front Shock absorber has an excessively worn bush (2.7.4)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Shock absorber has an excessively worn bush (2.7.4)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

front brake pads low borderline

nail in o/s/f tyre

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Brake pipe excessively corroded (3.6.B.2c)

Offside Suspension arm has excessive play in a ball joint (2.4.G.2)

Centre Exhaust has part of the system excessively deteriorated (7.1.1a)

Nearside Front Anti-roll bar linkage has excessive play in a pin/bearing (2.4.G.2)

Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Bonded suspension unit bonding failed and part of unit is likely to become displaced (2.4.F.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)