1999 Lexus IS200

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. o/s low (1.2.1 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (5.3.6 (a) (i))

Nearside Rear handbrake lazy

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (5.3.6 (a) (i))

Rear Lower Suspension arm corroded but not seriously weakened x2 n/s and o/s (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame pin or bush worn but not resulting in excessive movement all showing age (5.3.4 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive all mounting areas (5.3.6 (a) (i))

Rear Upper Suspension arm corroded but not seriously weakened x2 n/s and o/s (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner and outer sill (6.1.1 (c) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive front mount area (5.3.6 (a) (i))

Nearside Rear handbrake lazy

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive front mount area (5.3.6 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill - rear of rear arch (6.1.1 (c) (i))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear mount area (5.3.6 (a) (i))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill- rear of rear arch (6.1.1 (c) (i))

Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear mount area (5.3.6 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner and outer sill (6.1.1 (c) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive front mount area (5.3.6 (a) (i))

Nearside Rear handbrake lazy

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive front mount area (5.3.6 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced rear underside (6.1.1 (c) (i))

Front Headlamp has a product on the lens but not seriously reducing light output x2 headlamps (4.1.4 (b))

Front Windscreen wiper blade defective x2 (3.4 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement inner bushes (5.3.4 (a) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive front mounting (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill inner & outer (5.3.6 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement inner bushes (5.3.4 (a) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive front mounting (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill inner & outer (5.3.6 (a) (i))

Rear Lower Suspension arm corroded but not seriously weakened nearside & offside (5.3.3 (b) (i))

Headlamp lens slightly defective x2 (4.1.1 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Outer Suspension component mounting repair covered in underseal sill (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength mount washer (5.3.6 (a) (i))

Offside Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Inner Tyre worn close to the legal limit (4.1.E.1)

Offside Front Inner Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Centre Rear Stop lamp not working (1.2.1b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Headlamp has a product on the light source so that the light output is severely reduced (1.7.5a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Lower Ball joint has excessive play (2.2.B.1f)

Offside Front Lower Ball joint has excessive play (2.2.B.1f)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

front tyres on edges

front tyres worn on sidewalls

near side tyre on 2 mm