1999 Land Rover Defender

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced floor (6.1.1 (c) (i))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt front (2.1.3 (g) (i))

Offside Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Upper Driver's door hinge deteriorated but the door can still be readily opened and closed (6.2.3 (c) (i))

Brake servo defective or ineffective (1.1.10 (a) (i))

Front Registration plate missing (0.1 (a))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength as chalked (5.3.6 (a) (i))

Nearside Front Tyre fouling a part of the vehicle (5.2.3 (f))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength as chalked (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength as marked (5.3.6 (a) (i))

Offside Front Tyre fouling a part of the vehicle (5.2.3 (f))

Offside Rear Suspension arm attachment bracket/mounting insecure A frame fixing bolt loose (5.3.3 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength as marked with chalk (5.3.6 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Service brake efficiency below requirements (1.2.2 (a) (i))

Offside Upper Driver's door hinge deteriorated but the door can still be readily opened and closed (6.2.3 (c) (i))

All 4 Wheels and Tyres Different From Original Test

Nearside Front Outer Drag link end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Outer Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Oil leak, but not excessive Engine (8.4.1 (a) (i))

Oil leak, but not excessive Transmission and Transfer Box (8.4.1 (a) (i))

Central Rear Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt A Frame Ball Joint (5.3.4 (b) (ii))

Front Registration plate missing (0.1 (a))

Nearside Front Steering system fouling Wheel/Tyre Rubbing on Radius Arm (2.1.4 (a))

Offside Front Lower Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i))

Offside Front Steering system fouling Wheel/Tyre Rubbing on Radius Arm (2.1.4 (a))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis Near to Outrigger (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outrigger (5.3.6 (a) (i))

Nearside Front Outer Drag link end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Obligatory mirror slightly damaged Glass Has Crack (3.3 (b) (i))

Offside Front Outer Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Oil leak, but not excessive Engine (8.4.1 (a) (i))

Oil leak, but not excessive Transmission and Transfer Box (8.4.1 (a) (i))

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Seat belt slightly damaged (7.1.2 (b) (i))

Front Exhaust has a minor leak of exhaust gases flexi (6.1.2 (a))

Offside Rear Body mounting fixing insecure, but overall security not significantly reduced (6.2.2 (c) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Brake pedal wearing smooth (1.1.2 (c))

Exhaust has a minor leak of exhaust gases at front flexy (6.1.2 (a))

Indicator switch insecure (4.4.2 (a) (i))

rear brake effort poor

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s front outrigger at drivers footwell (6.1.1 (c) (i))

Brake pedal wearing smooth (1.1.2 (c))

Exhaust has a minor leak of exhaust gases at front flexy (6.1.2 (a))

Indicator switch insecure (4.4.2 (a) (i))

rear brake effort poor

Offside Front Windscreen wiper blade defective (3.4 (b) (i))

Central Rear Exhaust system not adequately supported (7.1.1)

Front Brake pad(s) less than 1.5 mm thick X 4 (3.5.1g)

Front brake disc in such a condition that it is seriously weakened X 2 (3.5.1i)

Nearside Front Front wheel bearing rough when rotated (2.5.A.2)

Offside Front Front wheel bearing rough when rotated (2.5.A.2)

Offside Front Headlamp aim too high DONE (1.8)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front door hard to open

Offside bonnet hinge worn

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Front door hard to open

Offside Headlamp aim too high (1.8)

Offside bonnet hinge worn

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Offside Drag link end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Track rod end ball joint has slight play (2.2.B.1f)

exhaust hanger broken, but is still supported

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Headlamp aim too high (1.8)

Nearside Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Offside Drag link end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Headlamp aim too high and too far to the right. (1.8)

Offside Track rod end ball joint has slight play (2.2.B.1f)

exhaust hanger broken, but is still supported

engine fan cowling missing

patch welded repairs to underside covered with anti-corrosion protection compounds

surface corrosion to vehicle underside/chassis/components

Front Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Front registration plate missing (6.3.1a)

Nearside Drag link end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Tyre fouling a part of the vehicle (4.1.D.2)

Nearside Headlamp aim too low (1.8)

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Tyre fouling a part of the vehicle (4.1.D.2)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Rear Exhaust system not adequately supported (7.1.1)

Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Registration plate lamp not working (1.1.C.1d)

Front Steering arm deformed but serviceable (2.2.C.1d)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

engine fan cowling missing

rear crossmember fitted with metal trim plate not allowing full inspection

surface corrosion to vehicle underside/chassis/components

Nearside Rear Braking system leaking (3.6.A.1) DANGEROUS

Nearside Front wheel bearing has slight play (2.5.A.3c)

Non obligatory mirror damaged

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Drag link end ball joint has slight play (2.2.B.1f)

Offside Front Brake pipe slightly corroded (3.6.B.2c)