1999 Honda Cbr

Rear Shock absorber insecurely attached (5.3.2 (a) (i))

Front Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Brake fluid contaminated (1.8 (a))

Front Clutch lever bent so it cannot be readily operated clutch lever worn at pivot point, has fallen down,coming under the handlebar,also fouling bodywork (6.2.7 (b))

Front Headlamp aim too high (4.1.2 (a))

Rear Brake fluid not visible (1.1.10 (d) (iii)) DANGEROUS

Front Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Nail in tyre ()

Rear Tyre worn close to the legal limit (5.2.3 (e))

Suspension corroded but not seriously weakened Fork Stanchion (5.3.3 (b) (i))

Headlamp damaged but function not impaired (1.2.3a)

Dipswitch does not deflect the main beam/s, making them into dipped beam/s (1.2.2b(ii))

Headlamp damaged but function not impaired (1.2.3a)

Headlamp deteriorated but function not impaired (1.2.3a)

Rear Roller brake test indicates a slightly juddering brake (3.3.A1b)

Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp (1.2.2b(i))

Front Roller brake test indicates a severely juddering brake (3.3.A1b)

Rear Roller brake test indicates a severely juddering brake (3.3.A1b)

Headlamp deteriorated but function not impaired (1.2.3a)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Registration plate incorrect (6.3.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))