1999 Aprilia RS 50

Drive chain worn but not considered excessive (6.2.1e)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust noisy (7.1.2)

Drive chain excessively loose (6.2.1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear wheel bearings have excessive free play (2.4.A.2c)

Riders seat insecure (6.2.1a)

Front Fairings insecure but not likely to impede the steering (2.1.2e)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust slightly deteriorated (7.1.1a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Rear suspension bush has excessive free play (2.4.A2a(i))

Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust slightly deteriorated (7.1.1a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Motorcycle structure slightly corroded (6.1.1a)

Clutch lever positioned so it cannot be readily operated. (6.2.1g)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front shock absorber seal failed and leaking oil (2.3.3)

Front wheel bearings have excessive free play (2.3.5b)

Headlamp aim too high (1.6)

Rear Registration plate insecure (6.3.1b)

Steering headbearing has excessive free play (2.2.2)