1999 Honda CB500

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Headlamp aim too high (4.1.2 (a))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Drive chain excessively loose (6.1.7 (c) (i))

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Headlamp aim too far to the right (4.1.2 (a))

Nearside Rear Direction indicator obviously incorrectly positioned (4.4.3 (a))

Offside Front Direction indicator obviously incorrectly positioned (4.4.3 (a))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

clutch lever/cable slightly stiff in operation

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Headlamp aim too high (4.1.2 (a))

Front Stop lamp remains on when the brakes are released (4.3.2 (a) (iii))

Rear Wheel alignment incorrect which adversely affects the steering (2.4 (a))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Offside Front Brake disc(s) excessively worn (3.2.A1l)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Handlebar deformed (2.1.1b)

Rear position lamp deteriorated and function impaired (1.1.1b)

Rear wheel bearings have excessive free play (2.4.A.2c)

Drive chain excessively loose (6.2.1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front wheel bearings have excessive free play (2.3.5b)

Rear wheel bearings have excessive free play (2.4.A.2c)

Offside Inner Front Lower Brake component leaking fluid (3.2.B4)

Rear Tyre has a bulge caused by separation or partial failure of its structure (4.1.2a(ii))

Throttle has a significant change in engine speed whilst moving the steering from lock to lock (2.1.4)

Headlamp aim too high and too far to the left. (1.6)

Nearside Rear Direction indicator not working (1.5.1c)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Nearside Rear Direction indicators not working (1.5.1c)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Drive chain excessively loose (6.2.1d)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))