MOT Status
ExpiredMileage
86,088 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
accident damage to front panels
engine sump corroded and leaking oil
rear wiper split
slight noise in n/s rear wheel bearing
Front Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Headlamp aim too low (1.8)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Headlamp aim too low (1.8)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear wheel bearing rough when rotated (2.6.1)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
accident damage to front panels
engine sump corroded and leaking oil
rear wiper split
slight noise in n/s rear wheel bearing
sump is rusted and leaking oil
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Shock absorber has negligible damping effect (2.7.5)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Stop lamp not working (1.2.1b)
Offside Front Tie bar/rod has excessive play in a ball joint (2.4.G.2)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
sump is rusted and leaking oil
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
both rear wheel bearings have slight play
oil leak on the gearbox
sump is rusted and leaking oil
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Offside Headlamp not working on dipped beam (1.7.5a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
both rear wheel bearings have slight play
oil leak on the gearbox
sump is rusted and leaking oil
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Stop lamp not working (1.2.1b)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Rear Exhaust has part of the system excessively deteriorated (7.1.1a)
How Reliable is the Mazda 121?
Based on 50,730 MOT tests across 6,017 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
T422 KVM is a 1999 Mazda 121 in Silver with a 1,297cc petrol engine. This vehicle has been through 13 MOT tests with a personal pass rate of 53.8%.
Across all 1999 Mazda 121 models, the average MOT pass rate is 65.8% with a typical mileage of 56,329 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 121 fails its MOT is brake pipe excessively corroded, accounting for 4,459 recorded failures. If you're considering buying T422 KVM, it's worth having these areas checked by a mechanic before committing.
The Mazda 121 typically stays on UK roads for around 38 years. At 27 years old, this Mazda 121 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of T422 KVM?
You can check the full history of T422 KVM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was T422 KVM registered?
T422 KVM is a 1999 Mazda 121, first registered on 1 April 1999.
Is T422 KVM safe to buy?
The MOT history for T422 KVM shows 13 tests with a 53.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does T422 KVM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on T422 KVM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.