1999 Honda CG125

Drive chain slightly tight (6.1.7 (k) (i))

All direction indicators not working (4.4.1 (a) (ii))

Drive chain slightly tight (6.1.7 (k) (i))

Exhaust noisy (8.1.1 (a))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Rear swing arm bushes have slight play

Riders seat slightly loose (6.2.5 (a) (ii))

Steering headbearing has slight free play (2.2.2 (f) (i))

Exhaust noisy (8.1.1 (a))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Headlamp aim too high (4.1.2 (a))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Rear swing arm bushes have slight play

Registration plate incorrect (0.1 (c))

Riders seat slightly loose (6.2.5 (a) (ii))

Steering headbearing has slight free play (2.2.2 (f) (i))

Front Stop lamp not working (4.3.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Rear Stop lamp not working (4.3.1 (a) (ii))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Headlamp not working on main beam (4.1.1 (a) (ii))

Horn sound not in accordance with requirements (7.7 (c))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Headlamp aim too low (4.1.2 (a))

Offside Front shock absorber seal failed and leaking oil (2.3.3)

slight engine oil leak

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake locking device missing (3.2.A1e)

Front suspension has a slightly reduced damping effect (2.3.6c)

Front shock absorber has light misting of stanchion (2.3.3)

Fuel cap does not fasten securely maintaining the sealing arrangement (7.2.2b)

Fuel cap mounting flange/sealing method defective (7.2.2c)

Rear Wheel spoke missing (4.2.1b)

Rear reflector on motorcycle missing (1.4.1)

Rear wheel spindle securing nut(s) loose (2.4.A.2b)

Front shock absorber has light misting of stanchion (2.3.3)

Drive chain slightly loose (6.2.1d)

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

main stand is bent

rear brake noisy, advise inspection.

Rear Wheel spoke slightly loose. (4.2.1b)

Upper Fuel cap does not fasten securely by a positive means (7.2.2b)

Rear Wheel spoke slightly loose. (4.2.1b)