1999 Fiat Ducato

Bonnet cannot be secured in the closed position (3.1 (b) (i))

Emissions unable to be completed coolant level too low and not willing to risk trying to get engine up to temp - would only got to 65degrees (8.2.2.2 (e))

Front Headlamp aim unable to be tested due to headlight adjuster in cab not working and adjusters seized (4.1.2 (b))

Front Windscreen washer provides insufficient washer liquid no washer fluid (3.5 (a))

Nearside Bonnet primary retaining device excessively deteriorated bonnet mount has corroded away from mounting on inner wing (3.1 (c))

Nearside Exhaust system insecure exhaust rubber snapped (6.1.2 (a))

Offside Bonnet primary retaining device excessively deteriorated bonnet mounting corroded and likely to come off (3.1 (c))

Offside Exhaust system insecure exhaust mounting rubber missing (6.1.2 (a))

Service brake efficiency below requirements (1.2.2 (a) (i))

Spare wheel carrier fractured wheel carrier mounting cross member rotten and holed (6.1.5 (a))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement bushes perishing and starting to split (5.3.4 (a) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

coolant level low

Central Exhaust mounting defective (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Spare wheel mounting corroded but not to excess

Offside Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced arch at front (6.1.1 (c) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced outer sill holed (6.1.1 (c) (i))

Oil leak, but not excessive eng (8.4.1 (a) (i))

Rear spare wheel support beam corroded

front exhaust mount rubber crascking

reverse lamp inop

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Offside Side repeater not working (4.4.1 (a) (ii))

Rear Brake hose bulging under pressure (1.1.12 (d))

Offside Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced arch at front (6.1.1 (c) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced outer sill holed (6.1.1 (c) (i))

Oil leak, but not excessive eng (8.4.1 (a) (i))

Rear spare wheel support beam corroded

front exhaust mount rubber crascking

reverse lamp inop

Offside Rear Brake pipe excessively corroded on axle (1.1.11 (c))

Offside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Brake pipe corroded, covered in grease or other material on axle (1.1.11 (c))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Front Fluid leak harmful to the environment or a risk to other road users diesel pump (8.4.1 (a) (i))

Front Windscreen wiper not working (3.4 (a))

Spare wheel carrier corroded

Battery insecure (1.9.1)

Brake load sensing valve seized (3.6.E.3)

Nearside rear brake binding (3.7.B.1)

Offside Stop lamp not working (1.2.1b)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Service brake: efficiency below requirements (3.7.B.7)

Spare wheel carrier corroded

Nearside Side repeater not working (1.4.A.2c)

Battery insecure (1.9.1)

Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive inner wing (2.4.A.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

spare wheel mounting brackets slight corrosion

Exhaust emits excessive smoke or vapour of any colour white and black (7.4.B.4)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

spare wheel mounting brackets slight corrosion

Nearside Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Power steering pipe(s) or hose(s) excessively corroded (2.3.2)

Centre Exhaust system not adequately supported (7.1.1)

drivers wiper blade split

Front Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

exhaust system corroded

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Rear rear brake binding (3.7.B.1)

Front Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Nearside Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

exhaust system corroded

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

An item not tested (Manual)

Nearside Brake pipe excessively corroded (3.6.B.2c)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Headlamp aim too low (1.8)

front radiator crossmember heavy corrosion

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Offside Rear Rear wheel bearing has slight play (2.6.2)

Front brake disc slightly pitted (3.5.1h)

Nearside Front Direction indicator slightly discoloured (1.4.A.2f)

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Front Direction indicator slightly discoloured (1.4.A.2f)

Offside Front Front wheel bearing has slight play (2.5.A.3c)