1999 Mazda Bongo

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Fuel Pipe/s corroded

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Emissions unable to be completed (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases centre/rear (6.1.2 (a))

Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Rear Hydraulic brake calliper leaking (1.1.16 (b) (i))

Offside Rear Outer Suspension component mounting prescribed area fractured significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front inner sills (5.3.6 (a) (i))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Coolant leak slight.. 2x places?

Exhaust has a minor leak of exhaust gases at centre and rear joints (6.1.2 (a))

Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt both front (5.3.4 (b) (ii))

Anti-roll bar pin or bush excessively worn both rear D bushes (5.3.4 (a) (i))

Headlamp not working on dipped beam both (4.1.1 (a) (ii))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Coolant leak slight.. 2x places?

Exhaust has a minor leak of exhaust gases at centre and rear joints (6.1.2 (a))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Anti-roll bar linkage damaged and seriously weakened (5.3.3 (b) (i))

Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Exhaust has a minor leak of exhaust gases (7.1.2)

Central Exhaust has a minor leak of exhaust gases (7.1.2)

gearbox oil leak

oil leak (dangerous)

undertray/engine cover fitted

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust has a major leak of exhaust gases (7.1.2)

Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

gearbox oil leak

oil leak (dangerous)

undertray/engine cover fitted

Child seat fitted not allowing full inspection of adult belt

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Registration plate lamp not working (1.1.C.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Suspension joint nearside lower dust cover split/missing

Suspension joint offside lower dust cover split/missing