MOT Status
ExpiredMileage
200,629 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Lower Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
fuel tank filler pipe neck corroded
Offside Front Position lamp not working (4.2.1 (a) (ii))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Headlamp aim too low (4.1.2 (a))
Nearside Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Lower Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Headlamp aim too low (4.1.2 (a))
Offside Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
fuel tank filler pipe neck corroded
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced n/s o/s (5.3.3 (b) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Headlamp aim unable to be tested (4.1.2 (b))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced n/s o/s (5.3.3 (b) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Engine Covers Fitted Obscuring some Components in the Engine Bay
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear Bush (5.3.4 (a) (i))
Nearside Front Tyre has a cut but not deep enough to reach the ply or cords Sidewall 235/55/18 100V (5.2.3 (d) (i))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge 235/55/18 100V (5.2.3 (e))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear Bush (5.3.4 (a) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge 235/55/18 100V (5.2.3 (e))
Plastic Covers Fitted not Allowing Full Inspection of Outer Sills
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Engine Covers Fitted Obscuring some Components in the Engine Bay
Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear Bush (5.3.4 (a) (i))
Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear Bush (5.3.4 (a) (i))
Plastic Covers Fitted not Allowing Full Inspection of Outer Sills
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Engine Covers Fitted Obscuring some Components in the Engine Bay
Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear Bush (5.3.4 (a) (i))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear Bush (5.3.4 (a) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Plastic Covers Fitted not Allowing Full Inspection of Outer Sills
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Engine Covers Fitted Obscuring Some Components in the Engine Bay
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear Bush (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear Bush (5.3.4 (a) (i))
Nearside Front Headlamp aim too low (4.1.2 (a))
Offside Front Headlamp aim too low (4.1.2 (a))
Engine Covers Fitted Obscuring Some Components in the Engine Bay
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear Bush (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear Bush (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
N/S/F tyre worn on inside edge
O/S/F tyre worn on inside edge
Offside Front Tyre has ply or cords exposed (4.1.D.1b)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
registration plate deteriorated but not likely to be misread (6.3.1d)
wipers smear screen on return sweep
Front registration plate delaminated but not likely to be misread (6.3.1d)
Front tyres wearing on inside edge
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
How Reliable is the Lexus RX400H?
Based on 166,693 MOT tests across 9,581 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
T4 HPA is a 2008 Lexus RX400H in Grey with a 3,311cc other engine. This vehicle has been through 22 MOT tests with a personal pass rate of 68.2%.
Across all 2008 Lexus RX400H models, the average MOT pass rate is 82.6% with a typical mileage of 86,366 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Lexus RX400H fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 2,118 recorded failures. If you're considering buying T4 HPA, it's worth having these areas checked by a mechanic before committing.
The Lexus RX400H typically stays on UK roads for around 21 years. At 18 years old, this Lexus RX400H is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of T4 HPA?
You can check the full history of T4 HPA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was T4 HPA registered?
T4 HPA is a 2008 Lexus RX400H, first registered on 3 March 2008.
Is T4 HPA safe to buy?
The MOT history for T4 HPA shows 22 tests with a 68.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does T4 HPA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on T4 HPA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.