MOT Status
ExpiredMileage
58,514 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan area (7.1.1 (a) (i))
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill to outer sill along bottom edge corroded (6.1.1 (c) (i))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan area (7.1.1 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced centre floor pan/box section area to inner sill (7.1.1 (a) (i))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced sill to floor (6.1.1 (c) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front limited suspension travel, bump stop clearance minimal
Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Brake hose excessively deteriorated (1.1.12 (b) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Exhaust has a minor leak of exhaust gases around manifold area (7.1.2)
Nearside Front Front wheel bearing has slight play (2.5.A.3c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Front wheel bearing has slight play (2.5.A.3c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Vehicle structure has damage which adversely affects braking or steering (6.1.A.1)
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Parking brake: efficiency below requirements (3.7.B.7)
Exhaust has a minor leak of exhaust gases around manifold area (7.1.2)
Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Nearside Front Front wheel bearing has slight play (2.5.A.3c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Front wheel bearing has slight play (2.5.A.3c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Track rod end ball joint has slight play (2.2.B.1f)
Rear Inner Brake pipe slightly corroded both sides (3.6.B.2c)
brake pipes covered in grease
under vehicle covered in under seal
Front Sub-frame corroded and seriously weakened (2.4.G.1)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Rear Exhaust system not adequately supported (7.1.1)
brake pipes covered in grease
all over corrosion including steering suspension and brake components
heavy waxoiling making inspection hard
wipers poor just clearing
Brake performance not tested (3.7.A.1)
Nearside Front Brake hose ferrule excessively corroded (3.6.B.4e)
Offside Front Brake hose ferrule excessively corroded (3.6.B.4e)
Offside Front Steering component mounting prescribed area is excessively corroded (2.2.C.1h)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
front to rear brake pipes routed over fuel tank cannot be inspected visually
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
front to rear brake pipes routed over fuel tank cannot be inspected visually
front to rear brake pipoes routed over fuel tank cannot be in spected visually
Offside Track rod end ball joint has excessive play (2.2.B.1f)
front to rear brake pipoes routed over fuel tank cannot be in spected visually
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Rear registration plate insecure (6.3.1b)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the MG Mgf?
Based on 546,238 MOT tests across 40,565 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
T505 BPY is a 1999 MG Mgf in White with a 1,796cc petrol engine. This vehicle has been through 35 MOT tests with a personal pass rate of 60%.
Across all 1999 MG Mgf models, the average MOT pass rate is 65.7% with a typical mileage of 62,191 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a MG Mgf fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 37,610 recorded failures. If you're considering buying T505 BPY, it's worth having these areas checked by a mechanic before committing.
The MG Mgf typically stays on UK roads for around 31 years. At 27 years old, this MG Mgf is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of T505 BPY?
You can check the full history of T505 BPY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was T505 BPY registered?
T505 BPY is a 1999 MG Mgf, first registered on 31 August 1999.
Is T505 BPY safe to buy?
The MOT history for T505 BPY shows 35 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does T505 BPY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on T505 BPY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.