1999 Mazda Bongo

Brake pipe corroded, covered in grease or other material all front and rear (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Central Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Front Suspension arm pin or bush excessively worn and rear bush (5.3.4 (a) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint excessively worn lift (5.3.4 (a) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Offside Rear Suspension arm pin or bush excessively worn back bush (5.3.4 (a) (i))

Windscreen washer not working (3.5 (a))

Central Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

both front brake pipes corroded

both front tyres perished

underneath car and components undersealed

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Fuel pipe leaking (6.1.3 (b) (i))

Headlamp aim too high both (4.1.2 (a))

Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Windscreen washer provides insufficient washer liquid both (3.5 (a))

Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

both front brake pipes corroded

both front tyres perished

underneath car has been undersealed

Headlamp lens slightly defective both front (4.1.1 (b) (i))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Windscreen wiper blade defective (3.4 (b) (i))

offside and nearside inner sills/floor section covered with underseal covering what looks like fiberglass

Brake pad(s) wearing thin both rear (1.1.13 (a) (ii))

Front Steering component mounting prescribed area is excessively corroded crossmember (2.1.2 (e) (i))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch and front panel (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Position lamp not working both front (4.2.1 (a) (ii))

Brake pad(s) wearing thin both rear (1.1.13 (a) (ii))

Brake pad(s) wearing thin both front (1.1.13 (a) (ii))

Vehicle structure is corroded but structural rigidity is not significantly reduced front crossmember (6.1.1 (c) (i))

both sills at front corroded

Headlamp deteriorated but light output not reduced both front (1.7.5a)

Anti-roll bar has excessive play in a pin/bush both rear d bushes (2.4.G.2)

Emissions not tested (7.3.A.1)

Exhaust has a major leak of exhaust gases centre and rear pipes (7.1.2)

Horn not working (1.6.2a)

Offside Front Headlamp not working on main beam (1.7.5a)

Offside Front position lamp(s) not working (1.1.A.3b)

Stop lamp not working both rear (1.2.1b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Headlamp deteriorated but light output not reduced both front (1.7.5a)

Offside Front tyre worn on outside edge ,rear exhaust silencer corroded

Exhaust has a major leak of exhaust gases frontpipe (7.1.2)

Nearside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar has excessive play in a pin/bush d bush (2.4.G.2)

Brake pad(s) wearing thin both front (3.5.1g)

Slight play in n/s/r a.r.bar d bush.

Inner Front Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear fog lamp missing (1.3.2a)

Rear fog lamp switch missing (1.3.1a)

Windscreen washer provides insufficient washer liquid (8.2.3)

non j.i.s tyres fitted