2002 Toyota Lucida

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Lower Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Lower Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Lower Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Lower Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Lower Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Lower Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Lower Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced chassis (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))

Parking brake: efficiency below requirements (3.7.C.1b)

Service brake: efficiency below requirements (3.7.C.1a)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Brake pipe slightly corroded (3.6.B.2c)

Headlamp deteriorated but light output not reduced (1.7.5a)

Registration plate lamp not working (1.1.C.1d)

Brake pipe slightly corroded (3.6.B.2c)

Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)

Front number plate not fully secure but not likely to fall off

Front washer jets not positioned correctly

NSF wiper rubber split

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Rear Rear fog lamp not working (1.3.2b)

Nearside Side repeater incorrect colour (1.4.A.2f)

Offside Side repeater incorrect colour (1.4.A.2f)

Registration plate lamp not working (1.1.C.1d)

Nearside Front brake caliper has restricted free movement (3.5.1k)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)