1999 Mazda Bongo

Nearside Front Outer Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge inner and outer edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear Suspension arm corroded but not seriously weakened all arms (5.3.3 (b) (i))

sill trims fitted

vehicle undersealed inner sills

Emissions unable to be completed exhaust split (8.2.2.2 (e))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Rear Exhaust silencer insecure (8.1.1 (b) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Front Outer Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge inner and outer edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear Suspension arm corroded but not seriously weakened all arms (5.3.3 (b) (i))

sill trims fitted

vehicle undersealed inner sills

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Fuel cap/sealing device missing (6.1.3 (b) (i))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Position lamp showing white light to the rear (4.2.3 (a) (ii))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Oil leak, but not excessive (8.4.1 (a) (i))

Emissions not tested (8.2.2.2 (e))

Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Rear Exhaust system insecure (6.1.2 (a))

Rear Rear fog lamp not working (4.5.1 (a) (ii))

Rear Exhaust silencer likely to become detached (8.1.1 (b) (ii)) DANGEROUS

Offside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Rear All position lamps have a product on the lenses but not adversely affecting light output (4.2.3 (b) (ii))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Suspension component corroded but not seriously weakened All (5.3.3 (b) (i))

Coil spring corroded All springs (5.3.1 (b) (i))

Front Suspension arm corroded but not seriously weakened N/s , o/s (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Sill covers fitted - unable to inspect sills fully

Exhaust has a minor leak of exhaust gases Center section corroded holed behind rear joint (7.1.2)

Items removed from driver's view prior to test ()

Nearside Engine mount corroding

Rear Floor/ chasis corroding

Sill covers fitted- outer sills not inspected

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Outer sill covers fitted

Offside Outer sill covers fitted

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)