1999 Aprilia RS125

Front Fairings insecure but not likely to impede the steering (2.1.2e)

Front wheel bearings are slightly rough (2.3.5b)

Rear Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Roller brake test Higher brake efficiency normally obtainable. (3.3.A2a)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Rear mono-shock pivot excessively worn (2.4.B.4)

Rear position lamp insecure (1.1.1c)

Rear suspension bush excessively deteriorated (2.4.A2a(i))

Stop lamp does not illuminate immediately a brake applies (1.3.1a) DANGEROUS

Front Fairings insecure but not likely to impede the steering (2.1.2e)

Front wheel bearings are slightly rough (2.3.5b)

Rear Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Roller brake test Higher brake efficiency normally obtainable. (3.3.A2a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Headlamp aim too high (1.6)

Front Brake lever has inadequate reserve travel (3.1.3b)

Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i))

Rear reflector on motorcycle missing (1.4.1)

Stop lamp affected by the operation of another lamp (1.3.2)

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Fairings insecure and likely to impede the steering (2.1.2e)

Front Brake disc(s) is excessively distorted (3.2.A1m)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front suspension assembly component loose (2.3.1)

Headlamp aim beam image kick up to the offside (1.6)

Headlamp aim too high (1.6)

Motorcycle structure excessively damaged (6.1.1a)

Nearside Front Direction indicator damaged and function impaired (1.5.3a)

Nearside Rear Direction indicator not working (1.5.1c)

Nearside Rear Footrest missing (6.2.1a)

Offside Front Direction indicator not working (1.5.1c)

Offside Rear Direction indicator not working (1.5.1c)

Offside Rear Footrest missing (6.2.1a)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Steering control fouling between components which interferes with the free movement of the steering (2.1.2a)

Steering headbearing has excessive free play (2.2.2)

Wheel alignment incorrect which adversely affects the steering (2.5.1)

Drive chain sprocket carrier worn to excess (6.2.1e) DANGEROUS

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h) DANGEROUS

Rear wheel bearings have excessive free play (2.4.A.2c) DANGEROUS

Rear shock absorber has inadequate damping effect. (2.4.A.3b) DANGEROUS

Rear wheel has a missing wheel nut(s) (4.2.3a) DANGEROUS