1999 Mazda Bongo Friendee

OIL LEAK

UNDERSIDE HAS ALL OVER CORROSION, WOULD BENEFIT FROM TREATMENT/REPAIR TO PREVENT FURTHER DECAY

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Exhaust emissions likely to be affected by an exhaust leak CANNOT DO EMISSIONS TEST AS MACHINE CANNOT PICK UP READINGS AT TAIL PIPE. (LARGE EXHAUST LEAK AT FRONT OF CAT) (8.2.1.1 (b))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength NS AND OS INNER AND OUTER SILLS HAVE MULTIPLE HOLES AND HEAVILY CORRODED (5.3.6 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

OIL LEAK

UNDERSIDE HAS ALL OVER CORROSION, WOULD BENEFIT FROM TREATMENT/REPAIR TO PREVENT FURTHER DECAY

Brake disc worn, pitted or scored, but not seriously weakened All bake discs hve light corrosion to friction surfaces (lack of use?) (1.1.14 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive vehicle undersidehas all over corrosion, but not yet consdiered excessive. Would advise treatment to prevent further decay. (5.3.6 (a) (i))

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust emissions likely to be affected by an exhaust leak Will require an emissions test when presented for retest, as exhaust leak preventing emissions tester from picking up gas (8.2.1.1 (b))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength NSF and OSF inner sills corroded and holed (5.3.6 (a) (i))

Brake disc worn, pitted or scored, but not seriously weakened All bake discs hve light corrosion to friction surfaces (lack of use?) (1.1.14 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive vehicle undersidehas all over corrosion, but not yet consdiered excessive. Would advise treatment to prevent further decay. (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Sub-frame corroded but not seriously weakened Front and rear (5.3.3 (b) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill holed (5.3.6 (a) (i))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Sub-frame corroded but not seriously weakened Front and rear (5.3.3 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Windscreen wiper blade defective (3.4 (b) (i))

Tyre worn close to legal limit/worn on edge NSR AND OSR (5.2.3 (e))

Underside, arches and body areas have all over corrosion

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Windscreen wiper blade defective (3.4 (b) (i))

Tyre worn close to legal limit/worn on edge NSR AND OSR (5.2.3 (e))

Underside, arches and body areas have all over corrosion

Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Exhaust has a temp repair

Underside and outer body, including doors and non prescribed/prescribed areas has all over corrosion, but not (yet) considered excessive.

Exhaust emissions likely to be affected by an exhaust leak will require another emissions test upon retest (8.2.1.1 (b))

Service brake efficiency below requirements (1.2.2 (a) (i))

Underside and outer body, including doors and non prescribed/prescribed areas has all over corrosion, but not (yet) considered excessive.

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Oil leak

Vehicle has all over welded repairs to non structural areas

Bumper insecure front and rear (6.1.4 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i))

Nearside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front door excessively corroded

Suspension component mounting prescribed area is corroded but not considered excessive around rear suspension (5.3.6 (a) (i))

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Upper Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Upper Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front tyre cracking in treads

Emissions not tested (7.3.A.1)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Body has a projection caused by damage bumper insecure (6.1.C.1)

Nearside Front Lower Suspension arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Lower Suspension arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Body has a sharp edge caused by corrosion wheel arch (6.1.C.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner & outer sill (2.4.A.3)

Rear fog lamp not working (1.3.2b)

Offside Front tyre cracking in treads

Nearside Front Upper Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Upper Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

registration plate deteriorated but not likely to be misread (6.3.1d)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Front tyre cracking in treads

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front position lamp(s) not working (1.1.A.3b)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Offside Front tyre cracking in treads

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)

Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside front brake binding (3.7.B.1)

Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Brakes imbalanced across an axle (3.7.B.5b)

Offside Front front brake binding (3.7.B.1)

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

front brake application uneven (3.7.B.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear fog lamp adversely affected by the operation of another lamp (1.3.2f)

Child seat fitted not allowing full inspection of adult belt

Centre Stop lamp not working (1.2.1b)

Offside Rear fog lamp not working (1.3.2b)

Child seat fitted not allowing full inspection of adult belt

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear fog lamp missing (1.3.2a)