2009 Mazda Bongo

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Wheel bearing has slight play Slight noise (5.1.3 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced Inner wing (6.1.1 (c) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Emissions not tested not tested due to not being able to check the vehicle has enough oil (8.2.1.2 (d))

Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting front cross member excessively corroded (6.2.2 (d) (i))

Nearside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner sill (6.2.2 (d) (i))

Offside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner sill (6.2.2 (d) (i))

Brake pipe corroded, covered in grease or other material all break pipes (1.1.11 (c))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement front bush has slight play (5.3.4 (a) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement front bush has slight play (5.3.4 (a) (i))

radiator is incurred due to cross member being corroded

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Coolant leak ()

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both inner sills (6.2.2 (d) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

general body in poor condition

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Integral body structure is corroded but structural rigidity is not significantly reduced crossmember/rad panel (6.1.1 (c) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

headlamp lenses faded

steering column covers missing

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Front Registration plate does not conform to the specified requirements plate damaged (0.1 (d))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Integral body structure is corroded but structural rigidity is not significantly reduced crossmember/rad panel (6.1.1 (c) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

headlamp lenses faded

steering column covers missing

Front Brake pipe corroded, covered in grease or other material both (1.1.11 (c))

Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security crossmember (6.2.2 (d) (i))

Headlamp lens slightly defective both lenses faded (4.1.1 (b) (i))

Rear Brake pipe corroded, covered in grease or other material both (1.1.11 (c))

steering column cowling missing

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Front Brake pipe corroded, covered in grease or other material both (1.1.11 (c))

Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security crossmember (6.2.2 (d) (i))

Headlamp lens slightly defective both lenses faded (4.1.1 (b) (i))

Rear Brake pipe corroded, covered in grease or other material both (1.1.11 (c))

steering column cowling missing

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust emissions likely to be affected by an exhaust leak back box (8.2.1.1 (b))

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

both rear wheel slightly tight to rotate

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

both rear wheel slight tight to rotate by hand

Nearside Front Headlamp not working on main beam (1.7.5a)

Coolant leak

Oil leak

Offside Headlamp aim too high (1.8)

Offside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Coolant leak

Oil leak

Nearside Headlamp not working on dipped beam (1.7.5a)

Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Tyre worn close to the legal limit (4.1.E.1)