2005 Mazda Bongo

Nearside Front Outer Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Nearside Rear Anti-roll bar attachment bracket/mounting damaged and seriously weakened (5.3.3 (b) (i))

Offside Front Outer Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Passenger seat(s) missing at time of test all except nearside front passenger seats removed ()

Power steering pipe/hose has slight seepage (2.1.5 (a))

Integral body structure is repaired but structural rigidity is not significantly reduced various nearside and offside repairs (6.1.1 (d) (i))

Items removed from driver's view prior to test ()

Oil leak, but not excessive (8.4.1 (a) (i))

Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Integral body structure is repaired but structural rigidity is not significantly reduced various nearside and offside repairs (6.1.1 (d) (i))

Items removed from driver's view prior to test ()

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced Outter sill (6.1.1 (c) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Power steering pipe/hose has slight seepage (2.1.5 (a))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Power steering component has slight seepage from a component (2.1.5 (a))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Outer Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Outer Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))

Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Outer Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Outer Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength In sill (5.3.6 (a) (i))

Central Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear rear brake binding (3.7.B.1)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

rear tyres larger size than front tyres

Offside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Rear fog lamp not working (1.3.2b)

Rear fog lamp obviously incorrectly positioned (1.3.2a)

rear tyres larger size than front tyres

Offside Rear fog lamp not working (1.3.2b)