1999 Kia Shuma

Brake pipe slightly corroded (3.6.B.2c)

Front Headlamp deteriorated but light output not reduced (1.7.5a)

Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Trailing arm corroded but not seriously weakened (2.4.G.1)

all exhaust metal bracket slightly deteriorated

both sides rear brake discs worn

both sides rear wheel arch slightly corroded

both sides rear wheel slightly binding

brake pedal rubber slightly deteriorated

front cross member slightly corroded

gear box slector rubber cover split

offside front indicator cover slightly insecure

offside front wiper rubber slightly split

offside rear registration plate bulb cover slightly insecure but bulb still working

rear exhaust one metal bracket broken but exhaust is secure position

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Headlamp aim not tested (1.8.A.1c)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Parking brake: efficiency below requirements (3.7.B.7)

Brake pipe slightly corroded (3.6.B.2c)

Front Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Play in steering rack inner joint(s)

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

all exhaust slightly deteriorated

both sides rear wheel arch slightly corroded

brake pedal rubber slightly deteriorated

front cross member slightly corrded

gear box slector rubber cover split

general corrosion under the vehicle

offsdie front indicator slightly insecure

offside front wiper rubber slightly split

offside rear registration plate bulb cover slightly insecure

rear exhaust one metal bracket broken but exhaust is secure

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Front Brake pad(s) wearing thin (3.5.1g)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Exhaust system not adequately supported (7.1.1)

Registration plate lamp not working (1.1.5c)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Registration plate lamp not working (1.1.C.1d)

Front Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Rear Mechanical brake component has restricted free movement (3.5.1k)

Front Tyre worn close to the legal limit (4.1.E.1)

Power steering component(s) has slight seepage from a seal (2.3.3b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Registration plate lamp not working (1.1.5c)