1999 Rieju Rr 50

All position lamps do not illuminate immediately when switched on (1.1.3a)

Direction indicators not working (1.5.1c)

Drive chain excessively loose (6.2.1d)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Wheel has an excessively distorted bead rim. (4.2.2)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear wheel bearings have excessive free play (2.4.A.2c)

Steering control handlebar movement restricted by taut cables (2.1.2c)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Clutch lever shortened. (6.2.1g)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front suspension has a slightly reduced damping effect (2.3.6c)

Steering movement slightly stiff (2.2.1a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front wheel bearings have excessive free play (2.3.5b)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Steering headbearing has excessive free play (2.2.2)

Brake lever is short but brake can still be readily applied (3.1.3c)

Clutch lever shortened. (6.2.1g)