1999 Mercedes-benz C

Nearside Front Road wheel fixing missing (5.2.1 (a) (i))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill / floor (7.1.1 (a) (i))

Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Front Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Nearside Rear Brake hose excessively deteriorated (1.1.12 (b) (ii))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Front Direction indicator incorrect colour Side repeator (4.4.3 (a))

Offside Front Road wheel fixing missing (5.2.1 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill /floor (7.1.1 (a) (i))

Offside Rear Brake hose excessively deteriorated (1.1.12 (b) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner - Lower wheel arch / sill (5.3.6 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Brake pipe corroded, covered in grease or other material All 4 mainly near to connections to flexi hoses (1.1.11 (c))

Coil spring corroded All 4 (5.3.1 (b) (i))

Corrosion to body and underside

Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Brake disc worn, but not excessively Inner face heavy corrosion and wear (1.1.14 (a) (i))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Shock absorbers has slight external damage to the casing All 4 corroded (5.3.2 (b))

Suspension arm pin or bush worn but not resulting in excessive movement All suspension arms having perishing bushes (5.3.4 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Tyre(s) with different structures are fitted across the same axle (5.2.3 (c))

Windscreen washer not working (3.5 (a))

Offside Headlamp aim too low (1.8)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Seat belt anchorage prescribed area is excessively corroded floor (5.2.6)

Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Registration plate lamp not working (1.1.C.1d)

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Lower Ball joint has excessive play (2.2.B.1f)

Nearside Front Coil spring mounting corroded and seriously weakened (2.4.C.3c) DANGEROUS

Offside Front Coil spring mounting corroded and seriously weakened (2.4.C.3c) DANGEROUS

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Outer Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Outer Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)