1999 Yamaha XV125

Front Riders seat slightly loose Seat modified but still secure (6.2.5 (a) (ii))

Rear Exhaust noisy (8.1.1 (a))

Rear Motorcycle structure is modified but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Rear Original motorcycle rear frame & fender structure modified, but still secure

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Drive chain worn to excess to tight (6.1.7 (c) (i))

Front Headlamp aim too low (4.1.2 (a))

Rear Brake rod insecure brake rod and split pin missing (1.1.15 (c))

Rear Rear reflector missing (4.8.2 (a) (ii))

Front Wheel fixing missing (single fixing) hub split pin missing (5.2.1 (a) (ii)) DANGEROUS

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Drive chain slightly loose (6.2.1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Headlamp aim too high (1.6)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Nearside Front Front shock absorber has light misting of stanchion (2.3.3)

Rear Drive chain sprocket slightly worn (6.2.1e)

Horn not working (1.7.3a)

Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k) DANGEROUS

Front Brake pad(s) contaminated by oil or grease (3.2.A1k) DANGEROUS

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Front brake dragging slightly

Nearside Front Front shock absorber has light misting of stanchion (2.3.3)

Rear Drive chain sprocket slightly worn (6.2.1e)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Nearside Front Front shock absorber has light misting of stanchion (2.3.3)

Horn not working (1.7.3a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Nearside Front Front shock absorber has light misting of stanchion (2.3.3)

Front Wheel has a slightly eccentric bead rim. (4.2.2)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h) DANGEROUS

Front Wheel has a slightly eccentric bead rim. (4.2.2)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)