2012 Mazda Bongo

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER SILL (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Lower Integral body structure is corroded but structural rigidity is not significantly reduced SILL (6.1.1 (c) (i))

Offside Front Windscreen damaged but not adversely affecting driver's view chip (3.2 (a) (i))

Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced wing corroded both sides (6.1.1 (c) (i))

heavily underseal underneath vehicle

Nearside Rear Inner Wing rotted

Offside Rear Inner Wing rotted

Rear Wiper

Emissions not tested Due to Water Leak (8.2.2.2 (e))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wing rotted (5.3.6 (a) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch to chassis rotted (6.1.1 (c) (i))

Offside Front Hydraulic brake calliper leaking (1.1.16 (b) (i))

Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill rotted (7.1.1 (a) (i))

Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill rotted (7.1.1 (a) (i))

Rear Seat belt missing Front facing Seat belt stalks missing (7.1.2 (a))

Rear Wiper

Front Water pipe holed and leaking

Nearside Rear Inner Cross member holed

Nearside Rear Inner Wing rotted

Offside Rear Inner Cross member holed

Offside Rear Inner Wing rotted

Rear Rear Facing seats have no seatbelt

Extensive welding repairs to underside of vehicle and coated in underseal

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Windscreen damaged but not adversely affecting driver's view stone chip (3.2 (a) (i))

Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember (6.1.1 (c) (i))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember (6.1.1 (c) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger (6.1.1 (c) (i))

Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember above rear axle (6.1.1 (c) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Extensive welding repairs to underside of vehicle and coated in underseal

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Windscreen damaged but not adversely affecting driver's view stone chip (3.2 (a) (i))

Nearside Inner sill rotted

Nearside Rear shocker rotted

Rear wiper split

both rear inner quarter panels rotted

stone chip zone a under 10mm

Brake pipe excessively corroded rear section of offside front to rear (1.1.11 (c))

Front Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))

Headlamp aim too low both (4.1.2 (a))

Nearside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt split (6.1.7 (g) (ii))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill rotted within 30cm of suspension mount (5.3.6 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear centre cross member around shocker mount rotted (5.3.6 (a) (i))

Nearside Inner sill rotted

Nearside Rear shocker rotted

Rear wiper split

both rear inner quarter panels rotted

stone chip zone a under 10mm

both rear quarter panels rotted

nearside rear shocker outer casing rotted

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced both sills rotted (7.1.1 (a) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both chassis rotted (6.1.1 (c) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

both rear quarter panels rotted

nearside rear shocker outer casing rotted

Body has slight corrosion under body (6.1.B.2)

Coolant leak ()

Nearside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cill (6.1.B.2)

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassy (6.1.B.2)

Offside Front Rear fog lamp not working (1.3.2b)

Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cill (6.1.B.2)

Coolant leak ()

Nearside Front Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear bump stop missing

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

offside front brake binding slightly

rear and middle row of seats missing at time of test

Nearside Headlamp aim too high (1.8)

Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear fog lamp not working (1.3.2b)