MOT Status
ExpiredMileage
85,906 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
rear cross member corroded
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Seat belt cut but not affecting the operation of the belt (5.2.2a)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Rear Brake pipe inadequately clipped (3.6.B.1)
Nearside Rear Brake pipe inadequately supported (3.6.B.1)
Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Brake pipe inadequately clipped (3.6.B.1)
Offside Rear Brake pipe inadequately supported (3.6.B.1)
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Headlamp aim too high (1.8)
Nearside Front Seat belt cut but not affecting the operation of the belt (5.2.2a)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Headlamp aim too low (1.8)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Seat belt stitching slightly frayed (5.2.2b)
Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front coil spring corroded (2.4.C.1b)
Offside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)
both sides rear inner sills slightly corroded in prescribed area
offside front outer c.v boot has small pin hole
Offside Rear Registration plate lamp not illuminating the registration plate (1.1.C.1e)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Seat belt stitching slightly frayed (5.2.2b)
Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front coil spring corroded (2.4.C.1b)
Offside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)
both sides rear inner sills slightly corroded in prescribed area
offside front outer c.v boot has small pin hole
Body has slight corrosion (6.1.B.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside rear brake binding (3.7.B.1)
Offside rear brake binding (3.7.B.1)
Body has slight corrosion (6.1.B.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
How Reliable is the Nissan Almera?
Based on 2,976,239 MOT tests across 231,560 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
T688 HPP is a 1999 Nissan Almera in Blue with a 1,392cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 66.7%.
Across all 1999 Nissan Almera models, the average MOT pass rate is 67.7% with a typical mileage of 74,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Nissan Almera fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 141,538 recorded failures. If you're considering buying T688 HPP, it's worth having these areas checked by a mechanic before committing.
The Nissan Almera typically stays on UK roads for around 30 years. At 27 years old, this Nissan Almera is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of T688 HPP?
You can check the full history of T688 HPP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was T688 HPP registered?
T688 HPP is a 1999 Nissan Almera, first registered on 30 July 1999.
Is T688 HPP safe to buy?
The MOT history for T688 HPP shows 15 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does T688 HPP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on T688 HPP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.