MOT Status
ValidMileage
172,638 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Heavily undersealed
Nearside Front Brake binding slightly
Offside Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Wheel bearing has slight play Both sides (5.1.3 (a) (i))
Nearside Rear Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Heavily undersealed
Nearside Front Brake binding slightly
Offside Front Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Wheel bearing has slight play Both sides (5.1.3 (a) (i))
Nearside Rear side wall perished / cracking
various repairs and all underside of vehicle covered in underseal
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Rear side wall perished / cracking
various repairs and all underside of vehicle covered in underseal
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Tyre slightly damaged/cracking or perishing 215/60/17 c (5.2.3 (d) (ii))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
various repairs and all underside of vehicle covered in underseal
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear fog lamp not working (4.5.1 (a) (ii))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake pad(s) worn down to wear indicator (1.1.13 (a) (i))
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced x member (6.1.1 (c) (i))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced several places (6.1.1 (c) (i))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced x member (6.1.1 (c) (i))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced several places (6.1.1 (c) (i))
Power steering ram leaking (2.1.5 (a))
Windscreen wiper does not clear the windscreen effectively x2 (3.4 (b) (ii))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Coil spring corroded x2 (5.3.1 (b) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced all (6.1.1 (c) (i))
Rear valence corroded
all rear seats not fitted
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside inner wheel arch corroded
Oil leak, but not excessive (8.4.1 (a) (i))
Rear cross member corroded
inner sills corroded - n/s and n/s
Nearside Headlamp aim too high (4.1.2 (a))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Rear fog lamp missing (4.5.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside inner wheel arch corroded
Oil leak, but not excessive (8.4.1 (a) (i))
Rear cross member corroded
inner sills corroded - n/s and n/s
os rea wheel arch damaged
steering boots slightly damp
front to rear underside corroding
suspension component mounting point corroding os/r not excessive
suspension component mounting point ns/r corroding but not excessive
vehicle under sealed heavily
Exhaust emissions likely to be affected by an exhaust leak center (8.2.1.1 (b))
Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch x2 (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill corroding (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch x2 (5.3.6 (a) (i))
Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Rear Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive rear of wheel arch (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive of wheel arch (5.3.6 (a) (i))
front to rear under side of vehicle corroding badly
os rear wheel arch damaged
steering boots slightly damp
vehicle under sealed heavily
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)
Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Parking brake lever has no reserve travel (3.1.6b)
Power steering component(s) leaking from a failed seal (2.3.3b)
Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
nearside rear tyre worn inner and outer edge
offside front tyre cracking
offside front tyre worn on inner and outer edge
offside outer sill full of filler
offside rear chassis leg corroded
offside rear tyre worn on inner and outer edge
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
T701 YAB is a 1999 Mazda Bongo in White with a 2,449cc diesel engine. This vehicle has been through 21 MOT tests with a personal pass rate of 57.1%.
Across all 1999 Mazda Bongo models, the average MOT pass rate is 68.5% with a typical mileage of 125,870 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying T701 YAB, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 27 years old, this Mazda Bongo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of T701 YAB?
You can check the full history of T701 YAB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was T701 YAB registered?
T701 YAB is a 1999 Mazda Bongo, first registered on 1 July 1999.
Is T701 YAB safe to buy?
The MOT history for T701 YAB shows 21 tests with a 57.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does T701 YAB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on T701 YAB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.