1999 Suzuki GZ125

Drive chain slightly loose (6.2.1d)

front brake sticking slightly

rear brake squeeking

Drive chain slightly loose (6.2.1d)

creak from swinging arm pivot, no play detected

front brake binding slightly

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Wheel alignment slightly misaligned. (2.5.1)

Front Brake pipe slightly corroded (3.2.B2a)

Front Wheel corroded but not significantly reducing the original strength (4.2.1a)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

gear lever worn

Headlamp aim too high (1.6)

Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. (2.4.A.2d)

Registration plate delaminated (6.3.1.d)

Drive chain slightly loose (6.2.1d)

Front Brake pipe slightly corroded (3.2.B2a)

Front Motorcycle structure slightly corroded (6.1.1a)

Front Wheel corroded but not significantly reducing the original strength (4.2.1a)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear Motorcycle structure slightly corroded (6.1.1a)

gear lever worn

Drive chain excessively loose (6.2.1d)

Drive chain sprocket carrier worn to excess (6.2.1e)

Drive chain worn to excess (6.2.1e)

Headlamp aim too low and too far to the right. (1.6)

Rear Drive chain sprocket worn to excess (6.2.1e)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Steering headbearing has excessive free play (2.2.2)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Drive chain excessively loose (6.2.1d)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))