1999 Honda Accord

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

engine man. light on dashboard

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Front Windscreen washer not working (3.5 (a))

Nearside Front Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Front Position lamp with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii))

Nearside Front Service brake excessively binding (1.2.1 (f))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Offside Front Headlamp light intensity severely reduced (4.1.4 (a))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Side repeater not working (4.4.1 (a) (ii))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))

engine man. light on dashboard

Exhaust flexy/pipe corroaded.

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Exhaust flexy/pipe corroaded.

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

bonnet release catch stiff to operate

brake pipes to rear corroding

exhaust front flexible sections becoming worn

exhaust rear bracket shows signs of corroding

Front Body insecure and dangerous to other road users (6.1.B.1b)

Nearside Front Front position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Nearside Front Headlamp aim too low (1.8)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

bonnet release catch stiff to operate

brake pipes to rear corroding

exhaust front flexible sections becoming worn

exhaust rear bracket shows signs of corroding

Front Direction indicators slightly discoloured (1.4.A.2f)

Offside Brake pipe slightly corroded (3.6.B.2c)